stariq812
Member
Golf R has themI think it's the class/size along with cost savings
Sponsored
Golf R has themI think it's the class/size along with cost savings
Looks like there's a gap, which would be in line with other people's experiences here. Is that right?Released a very comprehensive video on this. One of my favorite mod
There shouldn't be an unplugged cable. There is two of the keyless sensors in the console. One in the rear that had an extension cable running to it and another on the passenger side. Make sure both are connected.Hey @notorious9i6 / @Integra23,
Thx for the info / video guide.
I did this mode recently but I am getting a keyless error/ warning on the dash even though I transported the keyless module from the Acura glove box to the Honda one. And connected it back.
this might be related but I can’t find where this this extra cable connects to. In the middle of the picture it has a light gray connector on it.
do you recall a cable that was left unconnected?
![]()
Thanks! I recall seeing this. After plugging it back in everything is back to normal.There shouldn't be an unplugged cable. There is two of the keyless sensors in the console. One in the rear that had an extension cable running to it and another on the passenger side. Make sure both are connected.
I see. I want to connect it to the USB-C (that I purchased separately). It seems like our car is missing a part of that harness that connects to USB?Yes, that's the USB harness, AKA 32114-T20-A40 - Sub-wire, Console (US). It connects to the center console light as well.
Yeah, since the ITS doesn't have the USB ports that's missing, but you may be able to buy the A-Spec harness to use if the part you purchased is for that trim.I see. I want to connect it to the USB-C (that I purchased separately). It seems like our car is missing a part of that harness that connects to USB?
![]()
I'm installing the vents now and just tried this. The A-spec harness unfortunately will not work. The Type S only has a white 2-pin connector that connects to the front of the harness that runs along the center console storage box. The A-spec harness is meant to replace that harness along the box (and add USB) but has only this blue 12-pin connector at the front. The only 12-pin connector I see in that area of the car is the grey one with staggered pins.Yeah, since the ITS doesn't have the USB ports that's missing, but you may be able to buy the A-Spec harness to use if the part you purchased is for that trim.
They probably don't "officially" sell it separately but if you email them I'm sure they can work something out with you. I know they sell the USB-C kit and include it there, as well as with the vent kit. I'd imagine they have the harness laying around in a parts bin somewhere and probably account for situations where someone gets a bad harness or something.Thanks for sharing!
Bummer about A-spec harnessI ordered the harness and it should arrive in a few days. Another wrong part. Now I have two useless harnesses in my collection (32114-3K0-H00 and 32114-T20-A40).
Based on what you posted the only way to make the USB-C working is to buy the Mikstore harness. I think they don't sell it separately. But will check again.