chuckee98
Member
Bummer.
Sponsored
Sponsored
StingertimeNC
Senior Member
What knob is this? Looks awesome!new knob
gohan408
Senior Member
- Joined
- Sep 7, 2023
- Threads
- 2
- Messages
- 127
- Reaction score
- 189
- Location
- Western PA
- Car(s)
- ITS / GTR
- Build Thread
- Link
StingertimeNC
Senior Member
Installed the TSP downpipe. Wasn't bad, no issues with studs, etc. I had help from my good buddy @pointbypatrol. And by help I mean I just passed him tools occasionally. Great to have friends!!
Just sent some logs to @JesterTuned for review and possible tune revision. No extra cost, Love Jester!! Car feels great, little extra power without adjusting tune, and pops and bangs got very aggressive, but now too drawn out. very snappy.
No check engine light either.
Just sent some logs to @JesterTuned for review and possible tune revision. No extra cost, Love Jester!! Car feels great, little extra power without adjusting tune, and pops and bangs got very aggressive, but now too drawn out. very snappy.
No check engine light either.
Sponsored
Ktrw
Senior Member
- First Name
- Zach
- Joined
- Aug 30, 2024
- Threads
- 0
- Messages
- 99
- Reaction score
- 66
- Location
- United States
- Car(s)
- 2025 Integra Type S
Did mine like a month ago and the one nut got seized on the top stud toward the head and snapped the stud in half, the other nut came off but took half of the threads with it. Had to take it to a machine shop and they had a difficult time taking out the one that was seized. Asked them if they thought I should have done anything differently and they said "no, the stud material choice by Honda was terrible."
I used heat and penetrating oil which didn't really do shit because it still wouldn't come out. I know it works just fine for some people though so it's really just luck imo.
The turbo came right off though so at least the studs and bolts that go into the head are seemingly way better. Love the TSP downpipe now that it's on but it was an awful experience due to those studs. Also the stock heat shield mounting points on the TSP DP are trash so I had to drill out two of them on the heat shield.
StingertimeNC
Senior Member
Ha, same on the heat shield! not quite lined up right. Just drilled out all 4 so we had wiggle room.
We started to try to remove the studs once the DP was out and chickened out when it didn't budget easily. So on my car, it was two studs and two bolts. Different from the FL5.
We started to try to remove the studs once the DP was out and chickened out when it didn't budget easily. So on my car, it was two studs and two bolts. Different from the FL5.
TwinSkrullDesign
Senior Member
Do you still have the OEM black charcoal one?Changed out the dash pad for an OEM red one. Wanted to break up the sea of black.
SocalDE5
Senior Member
Installed the sirimoto clutch line. Took my time because of the brake fluid.
Easy bleed process with a stahlbus bleeder on the clutch mc. Clutch feels more direct and give some feel in clutch pedal.
Bleeding that line also helped my brakes feel even better. I guess there was some air left in the system.
Easy bleed process with a stahlbus bleeder on the clutch mc. Clutch feels more direct and give some feel in clutch pedal.
Bleeding that line also helped my brakes feel even better. I guess there was some air left in the system.
Sponsored
Tw1stedlog1k
Senior Member
- First Name
- Ken
- Joined
- Apr 17, 2023
- Threads
- 3
- Messages
- 576
- Reaction score
- 812
- Location
- Massachusetts
- Car(s)
- Apex Blue Pearl ITS
Did you do the CMC bypass and CDV delete while you were in there?
Victorofhavoc
Senior Member
- First Name
- Gordan
- Joined
- Jul 9, 2024
- Threads
- 12
- Messages
- 1,606
- Reaction score
- 1,099
- Location
- Kansas City
- Car(s)
- Integra type s
Yeah, while bleeding the clutch isn't technically required while bleeding the brakes, it's certain wise to do so. Better fluid there makes a decent difference.Installed the sirimoto clutch line. Took my time because of the brake fluid.
Easy bleed process with a stahlbus bleeder on the clutch mc. Clutch feels more direct and give some feel in clutch pedal.
Bleeding that line also helped my brakes feel even better. I guess there was some air left in the system.
SocalDE5
Senior Member
Agree 100%!
I did not. I am on the fence with those two mods. I know there is a better feel with the whole clutch package done.
I am just undecided at the moment.
But to be honest.... I was on the fence with the cluth line and I just installed it ?
PrecordFK7
Senior Member
- First Name
- Thom
- Joined
- Jun 21, 2021
- Threads
- 4
- Messages
- 63
- Reaction score
- 170
- Location
- California
- Car(s)
- 2024 Integra Type S
Swapped my PRL HVI and Turbo Inlet Pipe for Infinity Design matte carbon bits. I didn't like how there were 8 hose clamps and so many joints with the PRL setup vs just one joint and 2 clamps. Looks much nicer now too as a plus.
Last edited:
Underdog
Senior Member
- Joined
- Aug 11, 2024
- Threads
- 2
- Messages
- 119
- Reaction score
- 103
- Location
- Massachusetts, USA
- Car(s)
- ‘24 ITS, ‘06 Legacy GT
How was the install process? I've read a few accounts of slight modifications needed to fit.Swapped my PRL HVI and Turbo Inlet Pipe for Infinity Design matte carbon bits. I didn't like how there were 8 hose clamps and so many joints with the PRL setup vs just one joint and 2 clamps. Looks much nicer now too as a plus.
Sponsored