What did you do to your Integra Type S today? 🙋🏻‍♂️

[Evolving_e63]

The part number I ordered was correct and I had the car running when I tested the lights. I found the problem...

When you pull out the stock LED, there is a black piece attached to it that you have to remove and install on the new, red LED in order to guide the tail end of the LED strip directly up to the LED. When I removed the stock LED, I broke off this small piece of plastic INSIDE of the black piece. I had to completely remove the door panel and pry open that LED mechanism so I could superglue that piece back on. Once I had done this (with extreme difficulty), everything worked beautifully!

Hopefully this helps someone in the future! Below is the piece in question and the before (broken install) and after (superglued and fixed install). I LOVE them.

IMG_1282.jpg

IMG_1281.jpg

IMG_1283.jpg

Your images aren't showing. I want to see

Sponsored

 

[Audio79]

Your images aren't showing. I want to see

Look up this title this is where I got my information from this room. Ambient Lighting
Thread starterEasyPickins Start dateMay 4, 2022 Watchers17 do a seach it should come up hope this helps

 

[Needs3Pedals]

I guess I’m not stock anymore after 26 years of driving Honda’s without tinkering. PRL RMM went in without too much fuss. I’m pretty shocked at how much improvement there is. I can bury throttle in 1st gear now without wheel hopping all over the place.

I don’t have much interest in drag racing or launches but I’m anxious to see how this helps me get the power down on corner exits.

 

[StingertimeNC]

How are the extra vibrations in the cabin?

 

[wontondon]

How are the extra vibrations in the cabin?

For what it's worth, I did the RMM alongside rigid collars, and the extra NVH is barely noticeable (a little at idle and a bit of vibration after downshifting to 3rd around 45mph)

 

[Needs3Pedals]

How are the extra vibrations in the cabin?

I can feel a little bit of extra vibrations at idle, but I can’t really feel anything additional while driving.

 

[Negitoro7]

Got tinted, 55% all-around (minus windshield). Came out darker than expected.

 

[gohan408]

Installed the Sirimoto bushings and the result is slightly more notchy. I was more looking forward to the short shifter adapter but ran into some issues.

Has anybody installed the short shift kit from them? The supplied white bushing doesn't quite go into the bushing housing. The OE (yellow) bushing doesn't fit the Sirimoto adapter.

 

[Vinnie]

Installed the Sirimoto bushings and the result is slightly more notchy. I was more looking forward to the short shifter adapter but ran into some issues.

Has anybody installed the short shift kit from them? The supplied white bushing doesn't quite go into the bushing housing. The OE (yellow) bushing doesn't fit the Sirimoto adapter.

i actually watched an install the other day and they took some sandpaper to the that metal ball. i wonder if that was to make it fit.

 

[gohan408]

i actually watched an install the other day and they took some sandpaper to the that metal ball. i wonder if that was to make it fit.

interesting, do you have a link to the video or was it in person?

 

[Vinnie]

interesting, do you have a link to the video or was it in person?

Skip to 4:13 it’s a different brand but similar concept.

 

[gohan408]

Skip to 4:13 it’s a different brand but similar concept.

awesome, thank you!

 

[SocalDE5]

Got a Paragon pizza delivered. 4 pies.

And thanks to a member... slapped on the prl intercooler before the wife got home.

 

[dockleryxk]

Got a Paragon pizza delivered. 4 pies.

And thanks to a member... slapped on the prl intercooler before the wife got home.

Slapped on the intercooler huh? You're faster than me!!!

 

[dockleryxk]

Special ordered some full burnt titanium fasteners & beauty washers from Downstar. 4th oil change/rotation - oil still had almost dark red hue to it, not brown at all this time.

*Edit: Oh, and the red A/C caps are from Verus Engineering.*

Tried fitting the APR CF cooling plate since the center piece alone was advertised to also fit the DE5 - it does not. Not even close. So returning that and will put towards some Chasing J's titanium lug nuts instead. Although the Raceseng ones are like wooowwww, but twice the price almost.

This is the first time I saw your yellow hood vent cover thing. It looks badass

Sponsored