Sponsored


New Integra Type S Owner

selentia

Member
First Name
Ian
Joined
Apr 8, 2025
Threads
0
Messages
12
Reaction score
20
Location
Bay Area, CA
Car(s)
'25 Integra Type-S, '07 TL Type-S (5AT)
You could try Ebay to find a Type R armrest or civic armrest that fits. I haven't confirmed, but the stock leather arm rest cover does come off, but I'm not sure it fits on the Type R lid assembly with proper hinge. If you have seen the post here about the Mikstore kit, you can use the stock hinge, but only two of the four screws fit. I will check here in the next couple days to see if the stock leather armrest cover fits on the Type R one and report back if you are interested in knowing.
That would be great! Getting just the bracket would be a lot cheaper than the whole lid assembly. My goal is to get all the parts before disassembling everything, but I am sure I will forget one screw, making it a two-step process.
I did it this way when I did the AC vent mod and the plastic base and hinge are indeed a direct swap. Just need to undo four screws and gently pry off the pad. I don't think the hinge is available separately without the pad, but a used armrest could save you some money. Like this one where the fabric is a little gross:
https://www.ebay.com/itm/287277751318
Sponsored

 
Joined
Mar 24, 2026
Threads
2
Messages
20
Reaction score
18
Location
Georgia
Car(s)
2026 Acura Integra Type S
I did it this way when I did the AC vent mod and the plastic base and hinge are indeed a direct swap. Just need to undo four screws and gently pry off the pad. I don't think the hinge is available separately without the pad, but a used armrest could save you some money. Like this one where the fabric is a little gross:
https://www.ebay.com/itm/287277751318
Good idea! Maybe I can even find a ripped one and save even more money.
 
OP
OP
HGHVLTS

HGHVLTS

Member
First Name
John
Joined
Feb 6, 2026
Threads
2
Messages
44
Reaction score
76
Location
805
Car(s)
2024 Integra Type S
Build Thread
Link
Installed the PRL Intercooler and Charge Pipes, long night. Full Intake system complete!

Acura Integra New Integra Type S Owner IMG_0823
Acura Integra New Integra Type S Owner IMG_0826
Acura Integra New Integra Type S Owner IMG_0827
Acura Integra New Integra Type S Owner IMG_0828
Acura Integra New Integra Type S Owner IMG_0830
Acura Integra New Integra Type S Owner IMG_0829

Acura Integra New Integra Type S Owner IMG_0837


Since I was already there with the bumper off, installed the OEM Illuminated Front Grill Emblem:

Acura Integra New Integra Type S Owner IMG_0836
Acura Integra New Integra Type S Owner IMG_0834
Acura Integra New Integra Type S Owner IMG_0835
Acura Integra New Integra Type S Owner IMG_0825



OEM Copper Rims, Spoon Lowering Springs and Invidia Q300 Cat-back Exhaust on deck!
 

UltraV

Member
First Name
Andrew
Joined
Feb 25, 2026
Threads
0
Messages
6
Reaction score
3
Location
Canada
Car(s)
DE5
Got the CTR factory LED lights installed, liking the red lighting a lot better. Camera is very generous with the actual lighting, far less bright than pics, still nice nonetheless.

IMG_0434.webp
IMG_0437.webp
IMG_0436.webp
Those LED parts fit all handle and ambient lighting areas for the doors? Think of doing this as well for doors.
 

Sponsored

OP
OP
HGHVLTS

HGHVLTS

Member
First Name
John
Joined
Feb 6, 2026
Threads
2
Messages
44
Reaction score
76
Location
805
Car(s)
2024 Integra Type S
Build Thread
Link
Those LED parts fit all handle and ambient lighting areas for the doors? Think of doing this as well for doors.
Yes, 7 LEDs, two for each door, two for the foot well, and one over the Qi Charger, the one part will take care of all of them, you just need to remove a few of the lenses from the stock LEDs and put it on the red ones.
 
Last edited:
OP
OP
HGHVLTS

HGHVLTS

Member
First Name
John
Joined
Feb 6, 2026
Threads
2
Messages
44
Reaction score
76
Location
805
Car(s)
2024 Integra Type S
Build Thread
Link
Fresh from Blackhawk, Mugen Hydrophilic Mirrors installed! Very easy to install!

Acura Integra New Integra Type S Owner IMG_0891

Acura Integra New Integra Type S Owner IMG_0893
 

Victorofhavoc

Senior Member
First Name
Gordan
Joined
Jul 9, 2024
Threads
12
Messages
1,612
Reaction score
1,103
Location
Kansas City
Car(s)
Integra type s
Fresh from Blackhawk, Mugen Hydrophilic Mirrors installed! Very easy to install!

IMG_0891.webp

IMG_0893.webp
How snug of a fit are they? My oem driver side rattles fiercely... I've considered swapping to the blue ones to see if it would fix it
 
OP
OP
HGHVLTS

HGHVLTS

Member
First Name
John
Joined
Feb 6, 2026
Threads
2
Messages
44
Reaction score
76
Location
805
Car(s)
2024 Integra Type S
Build Thread
Link
Well I would say its as snug as OEM, considering the OEM mounting base is used on these mirrors, kinda weird that it would be rattling so bad?!
 

Victorofhavoc

Senior Member
First Name
Gordan
Joined
Jul 9, 2024
Threads
12
Messages
1,612
Reaction score
1,103
Location
Kansas City
Car(s)
Integra type s
Well I would say its as snug as OEM, considering the OEM mounting base is used on these mirrors, kinda weird that it would be rattling so bad?!
Yeah it's been like this since new and dealer called it normal. It's one of the various poor dealer experiences I've had with this car.

I believe I've read a few other reports of people having the same issue around here, but it's been a while since I've looked into it. For track use, at 120mph it makes the mirror basically useless. Passenger side stays nice and tight.

I was hoping just a new mirror with the new clips would do it... Blue seemed like a fun way to give it a go.
 

Sponsored

camaro149

Member
Joined
Jan 16, 2025
Threads
0
Messages
10
Reaction score
12
Location
PA
Car(s)
25 Integra Type S
Yeah it's been like this since new and dealer called it normal. It's one of the various poor dealer experiences I've had with this car.

I believe I've read a few other reports of people having the same issue around here, but it's been a while since I've looked into it. For track use, at 120mph it makes the mirror basically useless. Passenger side stays nice and tight.

I was hoping just a new mirror with the new clips would do it... Blue seemed like a fun way to give it a go.
I have the same issue with mine. Driver side shakes as speed increases, passenger side is good. Haven't figured out if it's the mirror glass or the entire housing that's causing it. But slightly annoying either way.
 
OP
OP
HGHVLTS

HGHVLTS

Member
First Name
John
Joined
Feb 6, 2026
Threads
2
Messages
44
Reaction score
76
Location
805
Car(s)
2024 Integra Type S
Build Thread
Link
Got the Spoon Springs installed, took it for a drive and feel is so much better in Sport +, almost no compromise in the stock feel of the car, but definitely changed the dynamics of the car! Really liking them. Thanks to @nikw91 for the springs!! So far no rubbing either with the Bonoss Wheel Spacers, love em!!

Acura Integra New Integra Type S Owner IMG_0917
Acura Integra New Integra Type S Owner IMG_0918
Acura Integra New Integra Type S Owner IMG_0916
Acura Integra New Integra Type S Owner IMG_0912


While installing springs, my lower plate was missing, replaced with WOT/HPT Performance cooling plate from @Unity Performance!

Acura Integra New Integra Type S Owner IMG_0914
Acura Integra New Integra Type S Owner IMG_0915
Sponsored

 
Last edited:
 





Top