Sponsored


New Integra Type S Owner

OP
OP
HGHVLTS

HGHVLTS

Member
First Name
John
Joined
Feb 6, 2026
Threads
1
Messages
34
Reaction score
60
Location
805
Car(s)
2024 Integra Type S
Build Thread
Link
no gaps or issues? Maybe I missed it in the thread but can you provide a link to this piece and any others you used to make it work?

wanting to do the shifter so i figured might as well do this at the same time
Go here!

https://www.integraforums.com/forum/threads/rear-ac-vents-part-kit-from-2022-civic.50143/page-11

I ordered those parts from JDMYamato, came quick too. These are factory fresh parts, no cutting, no trimming, matched the interior better and fitment is perfect!
Sponsored

 
OP
OP
HGHVLTS

HGHVLTS

Member
First Name
John
Joined
Feb 6, 2026
Threads
1
Messages
34
Reaction score
60
Location
805
Car(s)
2024 Integra Type S
Build Thread
Link
Installed the Extreme Online store factory style extended spoiler. I liked the OEM Carbon Fiber spoiler style, however, I don't want any exterior carbon fiber, I was looking for a gloss black alternative. Was able to get this for $150 shipped, and was one of the very few I could find that is bolted to the car. Spoiler matched perfectly to the factory holes and gave everything needed to install. Still looks very factory; I'm very happen with the results.


Acura Integra New Integra Type S Owner IMG_0530
Acura Integra New Integra Type S Owner IMG_0534
Acura Integra New Integra Type S Owner IMG_0529
Acura Integra New Integra Type S Owner IMG_0536
Acura Integra New Integra Type S Owner IMG_0531
Acura Integra New Integra Type S Owner IMG_0540
Acura Integra New Integra Type S Owner IMG_0535
Acura Integra New Integra Type S Owner IMG_0537


Acura Integra New Integra Type S Owner IMG_0532


Acura Integra New Integra Type S Owner IMG_0538


Acura Integra New Integra Type S Owner IMG_0533
 
Last edited:
OP
OP
HGHVLTS

HGHVLTS

Member
First Name
John
Joined
Feb 6, 2026
Threads
1
Messages
34
Reaction score
60
Location
805
Car(s)
2024 Integra Type S
Build Thread
Link
Fresh From JDM Land, got the FL5 illuminated cupholder and console led lights along with an FL5 Factory OEM Start/Stop Button.

Acura Integra New Integra Type S Owner IMG_0552
Acura Integra New Integra Type S Owner IMG_0548
Acura Integra New Integra Type S Owner IMG_0545
Acura Integra New Integra Type S Owner IMG_0549


Here is some of the process, tried to follow the directions as best I could given that it was directions for RHD. A/C vent section on the dash needs to come off as it plugs into the harness at the Hazard button. I am trying to black out parts and since I was pulling it off anyway, I replaced the Start/Stop with a Type R one.

Acura Integra New Integra Type S Owner IMG_0543
Acura Integra New Integra Type S Owner IMG_0541
Acura Integra New Integra Type S Owner IMG_0546
Acura Integra New Integra Type S Owner IMG_0542
Acura Integra New Integra Type S Owner IMG_0547
 
Last edited:

Victorofhavoc

Senior Member
First Name
Gordan
Joined
Jul 9, 2024
Threads
12
Messages
1,573
Reaction score
1,079
Location
Kansas City
Car(s)
Integra type s

Sponsored

egxflash

Senior Member
Joined
Feb 25, 2024
Threads
7
Messages
649
Reaction score
504
Location
CA
Car(s)
2024 Integra Type-S
Installed the Extreme Online store factory style extended spoiler. I liked the OEM Carbon Fiber spoiler style, however, I don't want any exterior carbon fiber, I was looking for a gloss black alternative. Was able to get this for $150 shipped, and was one of the very few I could find that is bolted to the car. Spoiler matched perfectly to the factory holes and gave everything needed to install. Still looks very factory; I'm very happen with the results.


IMG_0530.webp
IMG_0534.webp
IMG_0529.webp
IMG_0536.webp
IMG_0531.webp
IMG_0540.webp
IMG_0535.webp
IMG_0537.webp


IMG_0532.webp


IMG_0538.webp


IMG_0533.webp
wow looks great. i'm going to have to drop in one of these days and scope out all the mods. I haven't done squat to mine except for intake and borla
 
OP
OP
HGHVLTS

HGHVLTS

Member
First Name
John
Joined
Feb 6, 2026
Threads
1
Messages
34
Reaction score
60
Location
805
Car(s)
2024 Integra Type S
Build Thread
Link
Are those jdm FL5 lights plug n play?
Some drilling required, but yes!

I like the cup holder light. That's fun.

Do you have a part number or link for it?
I ended up finding a decent deal on ebay, shipped direct from Japan.
Part number 08E16-T43-B01D, https://www.ebay.com/itm/198192716612 .
They accepted an offer of $180

wow looks great. i'm going to have to drop in one of these days and scope out all the mods. I haven't done squat to mine except for intake and borla
Appreciate it, cruise on by whenever!
 

MNTeggy

Senior Member
First Name
Ryan
Joined
Feb 7, 2025
Threads
2
Messages
83
Reaction score
77
Location
Minnesota
Car(s)
‘25 Integra Type S
wow looks great. i'm going to have to drop in one of these days and scope out all the mods. I haven't done squat to mine except for intake and borla
How’re you liking the borla? I’ve had mine for over 2,000 miles now and it’s still very loud. Like hurting my ears loud in sport+. The pops are great, but it’s very “boomy” sounding.
 

Victorofhavoc

Senior Member
First Name
Gordan
Joined
Jul 9, 2024
Threads
12
Messages
1,573
Reaction score
1,079
Location
Kansas City
Car(s)
Integra type s
How’re you liking the borla? I’ve had mine for over 2,000 miles now and it’s still very loud. Like hurting my ears loud in sport+. The pops are great, but it’s very “boomy” sounding.
Do you have a down pipe?

Mine isn't boomy unless you're in sport+ (wide open) and that 3.2-3.8k range where this engine just sounds awful with vtec swinging. In sport it's LOUD but sounds pretty good. Comfort now sounds great for zipping around in the city. I'm in comfort about 80% of the time now.
 

MNTeggy

Senior Member
First Name
Ryan
Joined
Feb 7, 2025
Threads
2
Messages
83
Reaction score
77
Location
Minnesota
Car(s)
‘25 Integra Type S
Do you have a down pipe?

Mine isn't boomy unless you're in sport+ (wide open) and that 3.2-3.8k range where this engine just sounds awful with vtec swinging. In sport it's LOUD but sounds pretty good. Comfort now sounds great for zipping around in the city. I'm in comfort about 80% of the time now.
No aftermarket downpipe anymore! I had the TSP and it would throw codes weekly and was extra boomy with the Borla. Now back to stock dp. I’m also in comfort about 80% of the time. I like the extra power and pops in sport + though. It would be great if sport + sounds like comfort with the pops added and comfort a little quieter. No one in my family wants to ride in my car because it’s so loud 😆. For enthusiasts only! Thinking of swapping out the resonator for a quieter one. I don’t think the Borla resonator even has perforations inside. I looked before install and it looked just like a straight pipe on the inside.
 

Sponsored

Victorofhavoc

Senior Member
First Name
Gordan
Joined
Jul 9, 2024
Threads
12
Messages
1,573
Reaction score
1,079
Location
Kansas City
Car(s)
Integra type s
No aftermarket downpipe anymore! I had the TSP and it would throw codes weekly and was extra boomy with the Borla. Now back to stock dp. I’m also in comfort about 80% of the time. I like the extra power and pops in sport + though. It would be great if sport + sounds like comfort with the pops added and comfort a little quieter. No one in my family wants to ride in my car because it’s so loud 😆. For enthusiasts only! Thinking of swapping out the resonator for a quieter one. I don’t think the Borla resonator even has perforations inside. I looked before install and it looked just like a straight pipe on the inside.
I honestly don't recall how it looked inside now, lol.

Yeah, one of the more frustrating use cases is that engine tune and exhaust are tied together. I have a track specific custom tune that allows for changing power, but keeps exhaust wide open. On very tight tracks or in the wet, you sometimes need less torque, but the exhaust noise is very helpful to know what rpm you're at without having to look down. Stock exhaust in sport+ was useless on track... Might as well be electric.

My son (6) and my daughter (2) will always pick the Integra to ride around in over the X7 and q7, but they want the exhaust in comfort most of the time, 😂. Stock they wanted sport+. Now with a third kiddo (born on the 8th) the Integra will become a large dust collector, unless it's just two kids and I going somewhere.
 
Joined
Mar 24, 2026
Threads
2
Messages
11
Reaction score
7
Location
Georgia
Car(s)
2026 Acura Integra Type S
Go here!

https://www.integraforums.com/forum/threads/rear-ac-vents-part-kit-from-2022-civic.50143/page-11

I ordered those parts from JDMYamato, came quick too. These are factory fresh parts, no cutting, no trimming, matched the interior better and fitment is perfect!
I was going to do the one from Mikstore, but then I found out that the bottom of the center storage console has to be cut out. You see the A/C duct at the bottom, which makes that storage area useless. Does your parts list have this same issue? How much was it, if you don't mind saying?
 
OP
OP
HGHVLTS

HGHVLTS

Member
First Name
John
Joined
Feb 6, 2026
Threads
1
Messages
34
Reaction score
60
Location
805
Car(s)
2024 Integra Type S
Build Thread
Link
I was going to do the one from Mikstore, but then I found out that the bottom of the center storage console has to be cut out. You see the A/C duct at the bottom, which makes that storage area useless. Does your parts list have this same issue? How much was it, if you don't mind saying?
I ended up buying a full center console from a Type R, it isn't as deep as the Type S and allows for the duct to be routed properly. There is a lot involved as I found out as I progressed with the project.

Mikstore kit: $260
Type R center Console, Ebay: $210
Parts for the OEM Factory rear vents and USB: $220
Bracket and hardware for Type R Box: $20
Grand total was a little over $700 to complete this.

I probably went about it the wrong way and there was probably a little bit better and cheaper way to get this accomplished. However, coming over the pond makes a lot of the cost about 1/3 in shipping.


For Reference, here's the Type S Box:
Acura Integra New Integra Type S Owner IMG_0554


This is the Type R Box:

Acura Integra New Integra Type S Owner IMG_0547


This is the bracket and hardware needed for the Type R Box:

Acura Integra New Integra Type S Owner IMG_0220
 
Last edited:

Victorofhavoc

Senior Member
First Name
Gordan
Joined
Jul 9, 2024
Threads
12
Messages
1,573
Reaction score
1,079
Location
Kansas City
Car(s)
Integra type s
I ended up buying a full center console from a Type R, it isn't as deep as the Type S and allows for the duct to be routed properly. There is a lot involved as I found out as I progressed with the project.

Mikstore kit: $260
Type R center Console, Ebay: $210
Parts for the OEM Factory rear vents and USB: $220
Bracket and hardware for Type R Box: $20
Grand total was a little over $700 to complete this.

I probably went about it the wrong way and there was probably a little bit better and cheaper way to get this accomplished. However, coming over the pond makes a lot of the cost about 1/3 in shipping.


For Reference, here's the Type S Box:
IMG_0554.webp


This is the Type R Box:

IMG_0547.webp


This is the bracket and hardware needed for the Type R Box:

IMG_0220.webp
Wow! 700? That's brutally cheap for the whole thing!

What does the mikstore kit do that the oem type r parts don't?
 
Joined
Mar 24, 2026
Threads
2
Messages
11
Reaction score
7
Location
Georgia
Car(s)
2026 Acura Integra Type S
[/QUOTE]
I ended up buying a full center console from a Type R, it isn't as deep as the Type S and allows for the duct to be routed properly. There is a lot involved as I found out as I progressed with the project.

Mikstore kit: $260
Type R center Console, Ebay: $210
Parts for the OEM Factory rear vents and USB: $220
Bracket and hardware for Type R Box: $20
Grand total was a little over $700 to complete this.

I probably went about it the wrong way and there was probably a little bit better and cheaper way to get this accomplished. However, coming over the pond makes a lot of the cost about 1/3 in shipping.
It sounds like you had to get the Mikstore kit just for the vent duck piping and that air duck splitter. Were you able to use the USB wire kit with it?
Sponsored

 
Last edited:
 





Top