Auto Folding Mirrors installed

[MacKharoni]

Anybody ordered from them recently? I placed my order couple weeks ago and so far only partial order is shipped. The main item (mirror kit) has not shipped and I have been unable to get in touch with the store. They are neither replying to emails or messages on FB.

It takes a while since it is shipped oversea at least a month

Sponsored

 

[ajamils]

It takes a while since it is shipped oversea at least a month

I understand but they are just very unresponsive. Also, my main concern is that they have only shipped part of the order.

 

[ajamils]

My kit finally shipped today. Can't say that I'm happy about their communication, as there was none... no reply on FB messenger or emails.

Will see when both of my packages arrive in couple of weeks.

 

[Integra23]

My kit finally shipped today. Can't say that I'm happy about their communication, as there was none... no reply on FB messenger or emails.

Will see when both of my packages arrive in couple of weeks.

I'm surprised they never returned your message. I contacted them about other components and they always responded.

 

[ajamils]

Received both of my shipments (one yesterday and one today). I bought the F-Kit and it came with bunch of extra wires as well. Looking at the instructions online, it shows that I still have to depin the harness? I thought F-kit was supposed to be plug and play. Are there different instructions for F-kit?

 

[Integra23]

Received both of my shipments (one yesterday and one today). I bought the F-Kit and it came with bunch of extra wires as well. Looking at the instructions online, it shows that I still have to depin the harness? I thought F-kit was supposed to be plug and play. Are there different instructions for F-kit?

I had to swap bases. Some just cut the rubber boot so they don't need to depin. I didn't want to do that..

 

[ajamils]

I'm going to swap bases as well and just use the original painted caps but getting confused with the instructions that shows connecting different wires.

Also, I received there two wires bundles but I think I'm missing the one shown in the image on the site.

 

[ajamils]

Is the driver side mirror supposed to be loose? When I put the glass back on, it seems like it is only connecting from the middle part so it is very loose. I can just poke it and it moves.

 

[Integra23]

Is the driver side mirror supposed to be loose? When I put the glass back on, it seems like it is only connecting from the middle part so it is very loose. I can just poke it and it moves.

If it's just the glass maybe it's not fully snapped on. Others had issues with the base being loose and required additional tightening

 

[ajamils]

Is the driver side mirror supposed to be loose? When I put the glass back on, it seems like it is only connecting from the middle part so it is very loose. I can just poke it and it moves.

If it's just the glass maybe it's not fully snapped on. Others had issues with the base being loose and required additional tightening

Figured out. The poles on the mirror housing in the kit are very small so required a lot more force than I was expecting for it to snap in.

Now on to the wiring.

 

[ajamils]

@Integra23, so after many hours (more than i thought it would take), I got everything to work except for the reverse tilt.

When i put the vehicle in reverse the mirror only tilts slightly. If i shift to neutral and back to reverse, it tilts more. I can continue doing that and it will continue to try to tilt even when it reached the max. It does not go back to normal when sifted back. Have to manually move the mirror back via switch.

I have double checked the wiring but couldn't figure it out. Any suggestion?

Edit:
I noticed that if I keep the car in reverse and toggle the side mirror switch from left to right, it tilts the mirror similar to as described above.

 

[Integra23]

@Integra23, so after many hours (more than i thought it would take), I got everything to work except for the reverse tilt.

When i put the vehicle in reverse the mirror only tilts slightly. If i shift to neutral and back to reverse, it tilts more. I can continue doing that and it will continue to try to tilt even when it reached the max. It does not go back to normal when sifted back. Have to manually move the mirror back via switch.

I have double checked the wiring but couldn't figure it out. Any suggestion?

Edit:
I noticed that if I keep the car in reverse and toggle the side mirror switch from left to right, it tilts the mirror similar to as described above.

I didn't order my kit with the tilt option. My Aspec tilt would do something similar and I ended up not using it . Only issue I have parking is seeing the curb at night since or backup lights are worthless.

 

[ajamils]

I didn't order my kit with the tilt option. My Aspec tilt would do something similar and I ended up not using it . Only issue I have parking is seeing the curb at night since or backup lights are worthless.

See my update here.
https://www.integraforums.com/forum/threads/diy-power-folding-mirrors-a-journey.51260/post-902143

 

[4Dparadox]

Anyone have a discount code for mikstore I am going to place an order for a set of these

 

[Integra23]

Anyone have a discount code for mikstore I am going to place an order for a set of these

717project worked in the past

Sponsored