What did you do to your Integra Type S today? 🙋🏻‍♂️

[G8rbcn]

Technically not today, but took delivery of my PWP ITS last Monday. Dropped her off for PPF today. This will be my DD and I will also use it for some track days and mountain drives to give my GT350 a rest.

Sponsored

 

[Victorofhavoc]

Technically not today, but took delivery of my PWP ITS last Monday. Dropped her off for PPF today. This will be my DD and I will also use it for some track days and mountain drives to give my GT350 a rest.

Careful with the ppf on the gloss black bumper sections. I had to have some pulled to relay and it took paint with it.

Congrats on the car, and enjoy on track! The Gt350 is a hoot.

 

[egxflash]

Careful with the ppf on the gloss black bumper sections. I had to have some pulled to relay and it took paint with it.

Congrats on the car, and enjoy on track! The Gt350 is a hoot.

I had some paint lift on the edges of the rear door bolsters when my PPF guy was installing. He tried touching it up but you can see it if you look for it.

I had the same thing happen on my truck when PPF was getting installed (different installer) but luckily for that one, it happened right smack in the middle of the side view mirror so he was able to sandwich the touch-up paint and you can't even tell anything ever happened.

I told my dealer what happened to just document it but it doesn't help that the PPF installer touched it up.

 

[whtciv2k]

Not today, but over the course of this week, I installed:
FK8 OEM shift knob
Acuity shift boot collar
Carbon fiber dash overlays
OEM carbon fiber mirror covers
all weather mats
all weather trunk tray
trunk net (style that lays flat)

hopefully my shifter area CF overlay, that covers the piano black plastic, arrives today.

 

[SocalDE5]

Installed the 2step dp.
Stripped the top stud bolt, bout 5mm of thread at the end of it.

I thought about cutting it off because there was plenty of bolt left or asking my neighbor for his thread chaser.

I just cleaned the stud bolt threads that were still good and used an aluminum nut to find a good new 1st thread. It worked and put a new steel lock nut. I got lucky.

An fyi if you reuse the heat shield. It needs some help fitting so I had to drill a bit to remove material so the holes line up.

 

[whtciv2k]

Hate the piano black around the shifter, so I got a cf overlay. The quality is actually pretty good.

 

[optronix]

Hate the piano black around the shifter, so I got a cf overlay. The quality is actually pretty good.

I like that one. Link?

Also you've probably mentioned the shift knob before, but which one is it again?

 

[whtciv2k]

I got you bro.

oem fk8 type r shift knob: https://a.co/d/iDNF7Ei I don’t know how it’s so cheap, but it was def genuine when I got it.

Cf center console overlay: Yipmotiv Dry Carbon Fiber Center... https://www.amazon.com/dp/B0D9JT13FM?ref=ppx_pop_mob_ap_share

 

[notorious9i6]

Jogon front lip in carbon fiber is here. It's much lighter than i thought which is perfect! Feels like it can take a beating. I'll be installing this later and making a video on it for those who are interested.


This is where i bought it from https://s.click.aliexpress.com/e/_DdAAv4p

is here

 

[notorious9i6]

No space in my garage to take proper shots but for those who interested

 

[optronix]

No space in my garage to take proper shots but for those who interested

Perfection. This car can't look any better than this IMHO.

 

[notorious9i6]

thanks @optronix!

Here are some photos outside

 

[SKINNIE]

https://www.tomeiusa.com/2024/12/17/full-titanium-muffler-for-integra-type-s-de5/

 

[dockleryxk]

Woooo Mugen steering wheel! Finally!

Plus some bonus Chasing J's titanium that I didn't bother taking a picture of on the car

 

[2012Baja]

1st mod to the car swapped out the Factory wheels and tires for a set of Apex SM-10RS in 18x9.5 along with another set of P4S. Didn't realize how heavy the stock wheels are but this cut off a nice chunk of rotating mass...

Sponsored