What did you do to your Integra Type S today? 🙋🏻‍♂️

[egxflash]

No way you will get a jack under.the front without them. I roll on the race ramps some then I can get a jack under it. That jackpoint is a good 4 ft back from the front bumper.

Oh yeah 100%. I meant, I want race ramps because I'd need ramps to get the jack underneath it anyway!

On my old car, I'd use my smaller jack on the pinchweld to raise the car a bit so my larger jack can get underneath. I'm pretty sure we're not supposed to do that on this car though, not to mention it's too tucked in there anyway.

Sponsored

 

[bpebler]

I used some leftover wood. Only downside is heavy but they don't move or rub after lowering 1".

 

[PRDE5]

My race ramps are 56 inches long, the one piece ones. They are great, no rubbing, no slipping, and light weight. I also have race ramp blocks for the rear wheels for when I have to raise the whole car.

 

[dmd2005]

@dmd2005 did you go Clearplex or Exoshield? XPEL is bringing their product to market later this year.

Exoshield

 

[Tw1stedlog1k]

Finally got around to doing the dark chrome front badge. Didn't require removing the bumper like I originally assumed.

 

[bpebler]

Finally got around to doing the dark chrome front badge. Didn't require removing the bumper like I originally assumed.

I like it! Black chrome looks clean and like it fits this car better.

 

[Integra23]

Finally got around to doing the dark chrome front badge. Didn't require removing the bumper like I originally assumed.

So you found a front black chrome badge? Looks great

 

[Tw1stedlog1k]

So you found a front black chrome badge? Looks great

If you're referring to the "A" say I have yet to find a dark chrome version of that that will fit. This is just the "Type S" which comes as a set of 4 badges (front, 2 sides, and rear). I just never got around to doing the front until now because I thought the front bumper had to come off.

Side note: you have to remove both of the locating pins on the back of the front badge because these were never meant for the Integra, they are supposed to be for the MDX. The pins won't line up with the Integra's holes. A small modification (I used needle nose pliers and snapped them off).

 

[Integra23]

If you're referring to the "A" say I have yet to find a dark chrome version of that that will fit. This is just the "Type S" which comes as a set of 4 badges (front, 2 sides, and rear). I just never got around to doing the front until now because I thought the front bumper had to come off.

Side note: you have to remove both of the locating pins on the back of the front badge because these were never meant for the Integra, they are supposed to be for the MDX. The pins won't line up with the Integra's holes. A small modification (I used needle nose pliers and snapped them off).

Ah yeah. For some reason i thought something was different and its the A.
The adhesive on that front badge is a PIA to remove.

 

[Justpassedu]

Got some parts in the mail. Carbon interior door panels and the H&R Springs , still waiting on my spacers to come .

 

[ABPDE5]

Got some parts in the mail. Carbon interior door panels and the H&R Springs , still waiting on my spacers to come .

Are those the Jogon door panels?

...
Where'd you order?
Real CF?
How's the fit / finish?

I've been eyeing those and the dash trim.

 

[Justpassedu]

Are those the Jogon door panels?

...
Where'd you order?
Real CF?
How's the fit / finish?

I've been eyeing those and the dash trim.

Yes they are the Jogan , fit and finish seem nice. I got them 2nd hand off a fb group member who didn’t want to install . He said he put them on but the tape provided was not sticky enough so I’ll be putting my own 3m tape on them and installing shortly . They are real carbon as you can see the back .

 

[ABPDE5]

Yes they are the Jogan , fit and finish seem nice. I got them 2nd hand off a fb group member who didn’t want to install . He said he put them on but the tape provided was not sticky enough so I’ll be putting my own 3m tape on them and installing shortly . They are real carbon as you can see the back .

Let me know how the install goes and share pics?
Might be enough to get me to pull the trigger.

 

[Justpassedu]

Let me know how the install goes and share pics?
Might be enough to get me to pull the trigger.

Will do , may be a week or so until I can get them on but I’ll post an image after install .

 

[SkiLLeT]

New to Acura and forum.
Damn fun car?!

Sponsored