Eibach Pro Spring Rates for 2023+ Integra

[Fngslim]

How long have they been installed? Maybe in time the front will sag a little to match once they break in?

It’s been like 3 months lol they been like that since first day, everything double checked nothing is upside down no noises or etc it’s just like almost quarter an inch lower in rear than front almost, here is a few photo examples

 

[SeanIsElsewhere]

It’s been like 3 months lol they been like that since first day, everything double checked nothing is upside down no noises or etc it’s just like almost quarter an inch lower in rear than front almost, here is a few photo examples

Very strange but at least your car still looks fly!

Ill have to look into this more

 

[OEMjoe]

I've heard about the even drop springs lowering the rear too much. But the 1.3 front 1.0 rear should compensate for it on this kit in theory.

Did you add camber adjustments? --Negative camber could give the illusion that the tire is more tucked into the wheel well.

 

[flyinglumpia]

I've heard about the even drop springs lowering the rear too much. But the 1.3 front 1.0 rear should compensate for it on this kit in theory.

Did you add camber adjustments? --Negative camber could give the illusion that the tire is more tucked into the wheel well.

I agree, if you have camber arm adjust the negative camber some and it will balance it out more.

 

[Lili23]

It’s been like 3 months lol they been like that since first day, everything double checked nothing is upside down no noises or etc it’s just like almost quarter an inch lower in rear than front almost, here is a few photo examples

looks great dude, I wouldn’t worry too much.

 

[KarlR.670]

I installed Eibach Pro Spring on my ride, I don't have any issues with drivability or ADS.

 

[23Teg]

I have the pro kits on my integra and it’s installed correctly 100% and the rear is lower than the front. Makes the car look rwd but really wish it was the opposite

I'm ordering the springs along with the rear sway bar today I'll keep everyone posted

 

[Fngslim]

I'm ordering the springs along with the rear sway bar today I'll keep everyone posted

If you can would definitely recommend the strut bar aswell, I have the sway bar rear only and the front strut bar and man does the car feel good going on corners and curves on the ramp. Like the car feels planted as hell. Make sure you got some summer tires and you’re good to go.

 

[23Teg]

If you can would definitely recommend the strut bar aswell, I have the sway bar rear only and the front strut bar and man does the car feel good going on corners and curves on the ramp. Like the car feels planted as hell. Make sure you got some summer tires and you’re good to go.

That's up next! Debating whether to get the PRL strut bar or 27Won

 

[enjay4553]

So I've been staying awake at night and laying low since my mishap but the shop called to let me know all I needed was an outer axle assembly. Came in around 8 bills for parts, labor, alignment and a new ego. I consider myself lucky. Should be rolling out of the shop this week. Happy Easter.

 

[treyk]

It’s been like 3 months lol they been like that since first day, everything double checked nothing is upside down no noises or etc it’s just like almost quarter an inch lower in rear than front almost, here is a few photo examples

I noticed your in Miami, did you go to a shop to get the lowering springs installed? If so, what shop and how much did they charge? I'm going to get some I just don't have the tools or confidence to do em myself.

 

[enjay4553]

Finally got her back! Here are measurements AFTER alignment (dims taken center of wheel to arch). No camber kit. Rides like stock.

Driver Front Before/After: 14.75"/13.75"
Driver Rear Before/After: 14.74"/13.75"
Pass Front Before/After: 14"/13.375"
Pass Rear Before/After: 14.375"/13.5"

BEFORE

AFTER

 

[JC-RH]

Needs more low.

 

[enjay4553]

Needs more low.

It's just fine for PA roads. Needs more offset and wheels!

 

[Fngslim]

I noticed your in Miami, did you go to a shop to get the lowering springs installed? If so, what shop and how much did they charge? I'm going to get some I just don't have the tools or confidence to do em myself.

Yea bro I’m in Miami, I worked at a shop at that time and I payed them $100 to do the work on my car, I think regular shop pricing they charge like 300-400.