OP
OP
slowcountry
Senior Member
- Thread starter
- #76
Finally made it so i could park in the garage today... old house/steep driveway problems.
Platform gives 4.5in of height and is 76in wide x 130in long. Ramp portion is 76in wide by 60 inches long, ripped 2x4s corner to corner for the grade. Made 6 ramp spines inset 2.5in, 10.5in, and 28in from each side.
There was baaaarely a scrape with just the ramp & platform, but added those 2.5in humps I had previously bought and its perfect.
Besides being able to park in the garage, this should also let me add the spoon progressive springs (.8in drop). Can easily add more clearance if needed.
May add astro turf to the top or paint it to make it look nice Lol
Platform gives 4.5in of height and is 76in wide x 130in long. Ramp portion is 76in wide by 60 inches long, ripped 2x4s corner to corner for the grade. Made 6 ramp spines inset 2.5in, 10.5in, and 28in from each side.
There was baaaarely a scrape with just the ramp & platform, but added those 2.5in humps I had previously bought and its perfect.
Besides being able to park in the garage, this should also let me add the spoon progressive springs (.8in drop). Can easily add more clearance if needed.
May add astro turf to the top or paint it to make it look nice Lol
Sponsored