What did you do to your Integra Type S today? 🙋🏻‍♂️

[ashmostro]

Same! Who else do you know that's in the area? PM me?

Sponsored

 

[whtciv2k]

Same! Who else do you know that's in the area? PM me?

Pm sent!

 

[tmperez]

Installed a homelink mirror. It took less than an hour and works perfectly. Same frameless mirror just with buttons. I really have no idea why the car wouldn’t come with this mirror to begin with.

I used the video below which was right on.



Part numbers:
08V03-3A0-100
08V03-30A-100

One thing i have seen is a few guys stuffing the wire behind the A pillar without removing the trim. I think it’s very important to keep the wire away from the air bag and that requires removal of the trim which is probably the hardest part of the whole thing.

 

[miksfield]

Got around to securing some side bolsters using a combination of Velcro straps and double sided tape. I might still get some custom upholstery or Fl5 seats in the future but we'll see if this works for now.

 

[SilverRocket]

Got around to securing some side bolsters using a combination of Velcro straps and double sided tape. I might still get some custom upholstery or Fl5 seats in the future but we'll see if this works for now.

My observation is that Acura made these for a "wider" clientele. IMHO the seats would have been perfect if the bolstering was exactly the same size and shape, however it should have started where the Ultrasuede is on the lower half, up until where it tapers in.

Sitting in the Type R seats, I liked the back (for this reason) but hated the seat portion because it was too aggressive and narrow.

 

[bisquick]

Got around to securing some side bolsters using a combination of Velcro straps and double sided tape. I might still get some custom upholstery or Fl5 seats in the future but we'll see if this works for now.

Does this contraption actually keep your body in place? I have a hard time believing Velcro and tension straps would keep body weight under centripetal force in place.

 

[miksfield]

Does this contraption actually keep your body in place? I have a hard time believing Velcro and tension straps would keep body weight under centripetal force in place.

Contraption is to keep the two little side cushions in place. Mostly because the cushions would fly around every time I got in and out of the car.

 

[ashmostro]

I wanted to do something unique and potentially controversial..... mission accomplished!

 

[ashmostro]

Mid-process. Material and color are Vvivid Ultra Gloss Racing Red.

 

[whtciv2k]

I wanted to do something unique and potentially controversial..... mission accomplished!

I don’t hate this. This reminds me of the red H badge. Good stuff!!

 

[ashmostro]

I don’t hate this. This reminds me of the red H badge. Good stuff!!

That was the idea!

Deciding whether I should do the front too. Thoughts?

 

[whtciv2k]

That was the idea!

Deciding whether I should do the front too. Thoughts?

The front might be ok since the S in type s is also red. Hrmmmm I Donno go for it? Worst case it can be removed

 

[ashmostro]

Yeah it's much easier to undo the front since that badge isn't VHB taped on like the rear. I'll prob try it out tomorrow!

 

[ashmostro]

Here's a pic I found online of another car. Silver badge but still gives an idea.

My one concern is that it's a much larger badge so might be too much red. But like you said, easy to undo.

 

[ashmostro]

Nah, not gonna do the front. Too big. I like just the rear!

Sponsored