What did you do to your Integra Type S today? 🙋🏻‍♂️

[edido]

The pops n bubbles gone could be due to the spoon thermostat. It opens sooner than the car expects. Throws a p0128 code....coolant flow/temp

Need to clear it to get em back when car makes it to proper temp. But every cold start will throw that code.

With hondata....you can turn off that code and get the bubbles when temp gets up.

I just got Hondata but haven’t used it yet.
If I turn off that code, the car will remember it? Or I need to do it every time?

Sponsored

 

[SocalDE5]

I just got Hondata but haven’t used it yet.
If I turn off that code, the car will remember it? Or I need to do it every time?

It will be in the uploaded map and stay that way.
The ecu will not display that code again.

Each time you upload a new map...you have to turn off that code again before you upload.

 

[bisquick]

Installed PRL HVI and TSP Downpipe.

Next: PTP Downpipe Blanket

 

[SocalDE5]

Tinted the windows finally.

Waiting on brake pads to arrive so I can install the paragon's.

 

[Justpassedu]

Got some more carbon to install , springs and 20mm spacers

 

[gohan408]

new CF trim piece to replace the tacky stick on (Link)

 

[MidwestDE5]

new CF trim piece to replace the tacky stick on (Link)

looks nice. How is the fit and finish in person?

 

[Integra23]

new CF trim piece to replace the tacky stick on (Link)

Nice. I am thinking about ordering the matte version

 

[gohan408]

looks nice. How is the fit and finish in person?

its real carbon so finish will vary but mine was pretty good, fitment is spot on. The problem with the synthcarbon was it didn't really fit perfectly on all 4 sides because its not a solid piece.

Nice. I am thinking about ordering the matte version

I really like the Matte finish but it doesn't match my steering wheel.

 

[chuckee98]

Made a cover for over the cup holders in the center console for when I’m not using the cup holders.

 

[Integra23]

its real carbon so finish will vary but mine was pretty good, fitment is spot on. The problem with the synthcarbon was it didn't really fit perfectly on all 4 sides because its not a solid piece.



I really like the Matte finish but it doesn't match my steering wheel.

I ordered the matte...

 

[new2teg]

I ordered the matte...

If you wouldn't mind, please post a Pic once installed as I'm considering the same!

 

[Doskiller]

Made a cover for over the cup holders in the center console for when I’m not using the cup holders.

What base material did you use for the cover? cardboard, plastic wood? Thanks in advance ......... Dos ;-)

 

[chuckee98]

What base material did you use for the cover? cardboard, plastic wood? Thanks in advance ......... Dos ;-)

I started with 3/16” thick balsa wood, but felt that it wasn’t stable or strong enough. Ended up using 1/8” thick 3-ply plywood that I got from a local hobby shop.

 

[Doskiller]

I started with 3/16” thick balsa wood, but felt that it wasn’t stable or strong enough. Ended up using 1/8” thick 3-ply plywood that I got from a local hobby shop.

Thanks Chuckee ............. appreciate ya .......... ;-)

Sponsored