Sponsored


Aftermarket Seats

ender_ong

Senior Member
First Name
Andrew
Joined
Jun 23, 2023
Threads
1
Messages
128
Reaction score
215
Location
Antioch, CA
Car(s)
18 Ridgeline RTLE white/black, 24 DE5 white/black, 08 AP2 CR black
Did y'all swap seats just because the new ones are more comfortable, or ?
The stock seat didn’t do the best job holding me in place when pushing the car close to its limits, especially on track. FL5-matching performance deserved seats on par with FL5 seats, at minimum, IMO, so I went with my seat choice.

Also, surprisingly yes, the new seat is more comfortable than the stock seat because of the better quality memory foam Recaro uses for that seat; I felt like the stock seats were too firm and became uncomfortable for me on long drives.
Sponsored

 
Last edited:

TwinSkrullDesign

Senior Member
First Name
Michael
Joined
Sep 25, 2024
Threads
6
Messages
210
Reaction score
348
Location
Wisconsin
Website
www.experimentalbrandllc.com
Car(s)
24 Integra Type-S / 26 MDX Type-S / 25 BMW M240i
Build Thread
Link
Acura should’ve just taken the FL5 seats and reskinned them with a little more luxury. A little leather and Alcantara mixture. The OEM seats in the DE5 are hot garbage.
 

UWU-mancer

Senior Member
First Name
UWU
Joined
Jul 17, 2025
Threads
4
Messages
1,035
Reaction score
694
Location
colorado
Car(s)
type s
I like the fl5 seats too but tbh i prefer the type s seats

not because they heat up. I barely use that but because my L4 and L5 are occasionally doing something I can’t pronounce because doctors like using a dead language to name stuff. Comfort is more important to me. On canyon roads I find the grippier material and side bolsters to be enough for me too, tho to be fair I’m not exactly going 10/10’s or anything like that

for folks who autox and track. Yeah I can see why these seats suck vs the fl5 seats and other aftermarket options
 
OP
OP

samaximuss

Senior Member
Joined
May 5, 2017
Threads
4
Messages
94
Reaction score
10
Location
Miami
Car(s)
Passat
Sorry to ask, but any chance anyone can share a good website where I can pickup a pair of buckets and rails to make a swap work? I don't know too many shops in my area that do so I'm going here out on a limb.
 

ender_ong

Senior Member
First Name
Andrew
Joined
Jun 23, 2023
Threads
1
Messages
128
Reaction score
215
Location
Antioch, CA
Car(s)
18 Ridgeline RTLE white/black, 24 DE5 white/black, 08 AP2 CR black
Sorry to ask, but any chance anyone can share a good website where I can pickup a pair of buckets and rails to make a swap work? I don't know too many shops in my area that do so I'm going here out on a limb.
I got my seat from LMTLS Auto, I worked with the owner, Luigi, and everything worked out, although it was a long wait because it came from Japan. Here’s the link to a red version of the seat, since it looks like you have the red interior; the second link is the seat rail:

https://shop.lmtlsauto.com/products/recaro-japan-sr-s-reclinable-sport-seat?variant=44740774166787

https://shop.lmtlsauto.com/products...c-type-r-fl5-2023?_pos=3&_sid=3dffdd043&_ss=r
 

Sponsored

Victorofhavoc

Senior Member
First Name
Gordan
Joined
Jul 9, 2024
Threads
12
Messages
1,924
Reaction score
1,358
Location
Kansas City
Car(s)
Integra type s
Sorry to ask, but any chance anyone can share a good website where I can pickup a pair of buckets and rails to make a swap work? I don't know too many shops in my area that do so I'm going here out on a limb.
No shop is going to remove safety devices to install seats for you. If they're willing to take that kind of risk, it's probably not a shop to do business with, imo.

Also, depending on if you do track or not and the organization/track you run with, moving to a true bucket requires full roll protection. To my knowledge, recaro is the only one that makes a seat that doesn't delete safety devices or sensors, but I don't know that anyone has swapped one with bags and sensors into a De5. If you show up to my group with aftermarket seats or harnesses, I send you to racecar tech because you qualify for full safety requirements check, where many people fail.

I also think the de5 seats suck. The Fl5 ones are no better, imo. I would call them worse actually. The Fl5 seats are also street seats so on track they also dont have room for a helmet. The belt openings are for show and should absolutely never be used for a harness on them in any reclinable seat. I'm not willing to convert the entire car into an airbag deleted, caged system so I'm not deleting seat bags or moving to a fixed bucket. I can hold myself pretty well on track by lowering the seat, tightening the belt up, and then raising the seat to hold it firm. That works about 85% and it's good enough for club stuff when I'm instructing. Racing is another story... That's when I cage cars, fit seats, and size to the driver. This is not the platform to build a true racecar off of.

If this sounds like I'm scaring you away from aftermarket seats, that's a partial intent. As a motorsports safety foundation certified instructor, I advocate for safety and the safest thing is either full stock as designed or fully fixed/caged system. Anything inbetween is simply a lot less safe. If you're totally fine with the risk that carries to you/occupants then for almost every seat you will need to delete airbags/sensors with resistors, you'll need an adapter rail (fl5 search nets a ton of them - make sure to pick a nice hefty one of thick aluminum or moderately thick steel), and you might want to test a few seats to determine your size. Many aftermarket seats are sized to the person and it's not just weight... There's height and shape to consider. Don't skip sizing and don't skimp on rails. Thin rails, flexible seats with roll bars, fixed seats with incorrect sizing, and bolt in bars are how I've seen people get serious injuries. Don't cheap out, and make sure you're inspecting it and the rails every year.
 

TwinSkrullDesign

Senior Member
First Name
Michael
Joined
Sep 25, 2024
Threads
6
Messages
210
Reaction score
348
Location
Wisconsin
Website
www.experimentalbrandllc.com
Car(s)
24 Integra Type-S / 26 MDX Type-S / 25 BMW M240i
Build Thread
Link
 





Top