Search results

I’d hook up an oscilloscope to see the pulse it’s getting from the computer.

Random info, Honda OEM oil is made by Philips 66. Even has the same bottle. Philips makes most if not all the different car manufacturers 0w-20 oil here in the US. Idemitsu use to be the pre fill out of the Japanese factories, not sure about now.

Not sure about thickness but this will add your flat bottom. https://www.ebay.com/itm/404174334773?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=tpsway44try&sssrc=4429486&ssuid=XNbSu0kDStG&var=&widget_ver=artemis&media=COPY

Communicates through the LIN network

My bad, must have skipped over this notification. I can provide that tomorrow , but also this is a different sensor than what was in the 10th gen civic this is a rain sensor/light sensor combo, whereas the 10th gen was the old standard light sensor

We have a pin kit but I don’t remember where it’s from. Any terminal pin kit should suffice like those on Amazon. Only thing is if it’s gold terminals, stick with gold terminals. You’ll need a terminal pin crimper also. There’s some kits that sell the terminal removal picks that will help you...

I can provide that for you when I’m at work tomorrow. As far as the de-pining itself I would have to see how the front connector looks. Also the pins are usually not to be reused as they’re crimped and it looks like you ripped it off the crimped pins entirely. I would advise buying new pins, to...

Glad you guys are safe! Always the best outcome. Cars can always be replaced. Had my 2019 Hatch civic totaled in a similar way. Except not by at truck but a 2019 Accord. Had less damage (visually) than yours but structurally the frame was toast. Was over $27,000 in repairs. The insurance ruled...

My integra has closer to 13,000 miles and I am now apart of this thread ?. Felt the “stickiness” while trying to make small adjustments to drive straight on the freeway I felt the slight resistance for a brief sec then back to normal until I stop moving the wheel again. Once it becomes an...

About 8 plastic clips and 7 rubber tabs and she’s off. In all seriousness it will be fine, had it on the 10th gen civic too on lower springs (than my integra) and was never an issue in regards to ripping off just a painful sounding scrap lol, but it’s also easy to remove from under the car

Save you the trouble & just keep driving and the asphalt/cement will grind it down for you ?

Sorry downloaded the wrong one that is the non-rain sensing sensor. For the rain/ambient light sensor it’s this one. @SilverRocket I don’t have part numbers for the ITS. I do have part numbers for the non-ITS, but seeing how the A-spec w/ tech and the ITS have both auto wipers, I’d assume they...

Here you go..

Here’s the connector, is this what you were looking for?

If I remember correctly, I don’t believe there is an “individual” wire that controls the headlights on/off. It’s controlled by the BCM once it receives communications through the B can network from the lighting sensor/unit the BCM then tells the relay control module through the network which...

I would need to know car specifics if it’s not a ITS and specifically what diagram you need

I can provide the schematic when I’m at work Monday. But I want to say you need to remove the shifter top piece, remove the piano gloss black trim, open the center console arm rest lid, and then you can remove the cup holder assembly. If I remember right

Although I haven’t bought one for the integra. I did buy the Honda cover for my 10gen civic hatch. I’m sure it’s similar. It was honestly very sturdy, thick, and good quality. Was molded to the car perfectly. I had it covering my car for 8 months outside while I was deployed. When I came back...

If you press the right-side steering wheel scroll wheel it lets you mute it temporarily

Took a glance at a 2023 Civic Type R to compare as well since that is more closer to an ITS than a ASpec. Diagram also matches the ITS and non-ASpec in regards to the seat controls. Part number is also the same as a non-ASpec P#: 81653SDBA71 $77.83