Acura Integra rear spoiler and diffuser

[ASpc-Tech]

Hello guys!
Do you know where I can find this spoiler and rear diffuser for Inegra Aspec?
At the dealer, prices go insane.

Thanks

Sponsored

 

[ASpc-Tech]

I think I found the rear diffuser at a dealer site at a decent price:
https://www.acurapartsnow.com/oem-parts/acura-rear-diffuser-8f033s5200

 

[STi from DSM]

Gloss Black Artwork V1 spoiler will mimic the dealer carbon fiber one at 50% of the price. If you want to go even more the Artwork V2 is a higher kickup.
https://artworkbodyshop.com/products/spoiler-acura-integra-2023

 

[ASpc-Tech]

Gloss Black Artwork V1 spoiler will mimic the dealer carbon fiber one at 50% of the price. If you want to go even more the Artwork V2 is a higher kickup.
https://artworkbodyshop.com/products/spoiler-acura-integra-2023

You are the best! Thanks

 

[WFORich]

I put the artwork V2 on my Type S and the fit was perfect. Getting the little stock lip wing off was a bit difficult. Here is a tip. there are about 8 barbed clips that need to be released from the inside. I found what worked best was a 6mm deep socket on a small ratchet to push over the clip to depress the barbs, then with lots of tape on the paint, a small plastic wedge or trim tool to hold the lip up while you move to the next clip. The v2 uses 6mm studs and nuts which worked well. getting nuts on was easy using a small piece of paper towel to tighten the nut in the socket so it doesn't fall out as you cant get your hands near some of the studs.

 

[STi from DSM]

It makes me wonder why they went to such great lengths to secure that spoiler when I have seen bigger ones secured with 3M tape. I have removed both RS3 spoilers, and on my M5 when I had them and those were all straight forward.
I will most likely have a shop do mine. They quoted me $200 and I would gladly pay that not to mess it up... which I most likely would.

 

[WesW]

I think I found the rear diffuser at a dealer site at a decent price:
https://www.acurapartsnow.com/oem-parts/acura-rear-diffuser-8f033s5200

What is the shipping? I have great luck calling my Acura dealer and getting price matched to what I find online which doesn't include shipping since I pick it up.

 

[Irishmykl]

I put the artwork V2 on my Type S and the fit was perfect. Getting the little stock lip wing off was a bit difficult. Here is a tip. there are about 8 barbed clips that need to be released from the inside. I found what worked best was a 6mm deep socket on a small ratchet to push over the clip to depress the barbs, then with lots of tape on the paint, a small plastic wedge or trim tool to hold the lip up while you move to the next clip. The v2 uses 6mm studs and nuts which worked well. getting nuts on was easy using a small piece of paper towel to tighten the nut in the socket so it doesn't fall out as you cant get your hands near some of the studs.

any pictures?

 

[ASpc-Tech]

Hey guys! I saw a girl the other day driving this Integra. Do you think those wheels are 20s? And which set of wheels aftermarket do you like the most?

 

[SeanIsElsewhere]

Hey guys! I saw a girl the other day driving this Integra. Do you think those wheels are 20s? And which set of wheels aftermarket do you like the most?

Oh yeah those are the 20” Mugen wheels with the brushed lip; super sweet. That fitment is awesome.
I’m looking to get some enkei TSVs

 

[ASpc-Tech]

Oh yeah those are the 20” Mugen wheels with the brushed lip; super sweet. That fitment is awesome.
I’m looking to get some enkei TSVs

What about Vossen HF-4T?
which sizing option should I pick?

 

[SeanIsElsewhere]

What about Vossen HF-4T?
which sizing option should I pick?

They’d be a sweet set! I’ve never been a fan of unidirectional spokes though. 20s would be cool especially with a slight drop.

 

[ashmostro]

It makes me wonder why they went to such great lengths to secure that spoiler when I have seen bigger ones secured with 3M tape. I have removed both RS3 spoilers, and on my M5 when I had them and those were all straight forward.
I will most likely have a shop do mine. They quoted me $200 and I would gladly pay that not to mess it up... which I most likely would.

I agree, it's silly.

My theory is Honda does it to give their dealers the opportunity to make bank of dealer installed accessories at time of sale. Even items like badges are overly secured and require unnecessary removal of adjacent items to install, unlike other car brands that just use 3M tape and call it a day.

 

[ASpc-Tech]

They’d be a sweet set! I’ve never been a fan of unidirectional spokes though. 20s would be cool especially with a slight drop.

Any idea what all those concave profile numbers mean, and which one should I choose? I would like wider tires in the rear. I don't know if that is possible, because the stock looks skinny.

 

[ASpc-Tech]

I think 20x10.5 D 5x114.3 +45 should be good.

Sponsored