Auto Folding Mirrors installed

[Big Duck]

I got the turn signals installed and now I’m trying to get the base swapped out. Did you cut this foam gasket from the mikstore base to get the wire out?

Sponsored

 

[Compromise]

I got the turn signals installed and now I’m trying to get the base swapped out. Did you cut this foam gasket from the mikstore base to get the wire out?

No. Remove the adhesive/foam/electrical tape from the cable and the whole thing should come off.

 

[Integra23]

I got the turn signals installed and now I’m trying to get the base swapped out. Did you cut this foam gasket from the mikstore base to get the wire out?

De-pin connector and remove the foam adhesive tape that sealed the bottom of the boot. Slide everything through. If you salvaged the tape reapply.

 

[mugendc4]

I got the turn signals installed and now I’m trying to get the base swapped out. Did you cut this foam gasket from the mikstore base to get the wire out?

IMO, I wouldn't swap out the base until you tested the mirror before hand. I know it will save time and I was tempted to do it but you don't want to be in that situation when everything is swapped and something is broken.

With my luck, something always goes wrong during shipping. Plus you can technically test the mirror when the door panels are off since you just need to connect the mirror to the main plug and making sure you did all the wiring correctly.

 

[Big Duck]

one last question before I start wiring and testing, the civic 2022 install manual mikstore provides states the following:

Before you insert any wire pin in any plug, make sure to unlock the PLUG first so the wire pin can push tru till the end and make contact. Failing to do this will not make it functional.

Did anyone else have to "unlock" their plug? I have no idea what this means.

 

[Integra23]

one last question before I start wiring and testing, the civic 2022 install manual mikstore provides states the following:

Did anyone else have to "unlock" their plug? I have no idea what this means.

Yeah there's a white or gray clip kind of thing that you slide and it release the pins. Pins don't fallout after releasing it's just a secondary capturing device on the connector

 

[Big Duck]

Yeah there's a white or gray clip kind of thing that you slide and it release the pins. Pins don't fallout after releasing it's just a secondary capturing device on the connector

I’m still a little confused, should I have unlocked the plug when repinning the mirrors I unpinned

do these look pushed all the way through?

 

[Integra23]

I’m still a little confused, should I have unlocked the plug when repinning the mirrors I unpinned

do these look pushed all the way through?

I don't think that plug has a lock.
That looks fully seated

 

[Big Duck]

took the door panel off, I think I see it now. These two plugs have squares on them that look like a separate peice. Are these the locks?

 

[Integra23]

took the door panel off, I think I see it now. These two plugs have squares on them that look like a separate peice. Are these the locks?

Yep. Those are the locks. You pop that before removing the pins

 

[Big Duck]

I think I’m missing a wire. The pink wire that goes to the mirror blinker is missing from the car door wiring harness. I plugged in the mirror to test and was able to move the mirror around but the blinkers won’t activate. I am driving a 2024 base spec integra

 

[mugendc4]

I think I’m missing a wire. The pink wire that goes to the mirror blinker is missing from the car door wiring harness. I plugged in the mirror to test and was able to move the mirror around but the blinkers won’t activate. I am driving a 2024 base spec integra

Looks like you're going to wire it if yours didn't come with turn signals initially. Probably should have gotten kit "C" since I believe it comes with extra harness/wiring for it. That's why I was making a little stink about mikstore charging "C" and "F" the same price when you get less harness. Sorry can't help you much on that part since mine came with turn signals but looks like their guide shows you what to do if you scroll down a bit to wire turn signals. Or ask any member that order the "C" kit that may have laying around to sell. I initially order "C" but they sent me "F" ?

https://www.dropbox.com/scl/fi/scw7....pdf?rlkey=yiee0c2bfqap9udev0kq5o3xi&e=1&dl=0

 

[Big Duck]

Looks like you're going to wire it if yours didn't come with turn signals initially. Probably should have gotten kit "C" since I believe it comes with extra harness/wiring for it. That's why I was making a little stink about mikstore charging "C" and "F" the same price when you get less harness. Sorry can't help you much on that part since mine came with turn signals but looks like their guide shows you what to do if you scroll down a bit to wire turn signals. Or ask any member that order the "C" kit that may have laying around to sell. I initially order "C" but they sent me "F" ?

https://www.dropbox.com/scl/fi/scw7....pdf?rlkey=yiee0c2bfqap9udev0kq5o3xi&e=1&dl=0

well "F" that... anyone here got extra turn signal wiring from kit "C"?

 

[Big Duck]

one other thing. I have auto lock enabled on my car, every time it auto locks, it tries to roll the windows up too. It will do this even when the windows are already up.

is there any way to disable this?

 

[Integra23]

well "F" that... anyone here got extra turn signal wiring from kit "C"?

I didn't use mine. I need to hunt for it and will let you know.

Sponsored