Sponsored


Type S Jogon lip and Eos spoiler carbon fiber upgrades.

OP
OP
Dynodan

Dynodan

New Member
First Name
Dan
Joined
Apr 30, 2026
Threads
1
Messages
3
Reaction score
6
Location
Southern Cali
Car(s)
25 Integra Type S
Damn I have to give that Jogon lip another look… how was the install?
Super easy, removed all 12 of the clips underneath. I had to drill out the hole on the outer pieces because they were just to tight. Made sure all the mating surfaces were clean, use a heat gun to warm up the mounting tape. After I mounted it I used a car jack with a piece of 2x4 to put some pressure on the lip to make sure adhered correctly. I really liked you don’t have to drill anything into the bottom. The hardest part was peeling back the tape once I have to clips in, it would probably be easier with two people. Thinking of getting the side skirts from jogon too. I’ll post it if I do.
 

ABPDE5

Senior Member
Joined
Jun 24, 2023
Threads
9
Messages
701
Reaction score
566
Location
ME
Car(s)
2024 Integra Type S
Super easy, removed all 12 of the clips underneath. I had to drill out the hole on the outer pieces because they were just to tight. Made sure all the mating surfaces were clean, use a heat gun to warm up the mounting tape. After I mounted it I used a car jack with a piece of 2x4 to put some pressure on the lip to make sure adhered correctly. I really liked you don’t have to drill anything into the bottom. The hardest part was peeling back the tape once I have to clips in, it would probably be easier with two people. Thinking of getting the side skirts from jogon too. I’ll post it if I do.
Which iteration of the lip is that? Can I ask for a pic from a bit further back?
 
 





Top