Center Brake Light Strobe Module

[NHCivicGuy]

Thanks for this! Was a little intimidated by phothrottle's video the CTR instructions. Glad it's much simpler in ITS.

I'm glad it's easier on the Integra, too! I wish they were all that simple to install.

Sponsored

 

[NHCivicGuy]

All models are back in stock!

 

[acurax]

Are there modules for the lower brake lights? I only ask b/c studies seem to suggest both high and low brakes lights flashing may be better than either on their own.

 

[NHCivicGuy]

Are there modules for the lower brake lights? I only ask b/c studies seem to suggest both high and low brakes lights flashing may be better than either on their own.

I can definitely look into building them for those. At this time, you can buy my “DIY” model and splice them in for virtually any brake light.

I went with the center brake light only because it’s “subtle” enough for most buyers and it still provides that extra attention. When I post polls about it, most only wanted the center one, as they thought the side brake lights would be too much and obnoxious.

 

[acurax]

Maybe them being too much and obnoxious is what those studies are picking up on.

 

[NHCivicGuy]

Only one available for the Teggy!

I am phasing back production and this will be the last one…

 

[TacoShop]

If you still have one for the type s, id take it off your hands. Lmk!

 

[NHCivicGuy]

If you still have one for the type s, id take it off your hands. Lmk!

Sadly I’m out with no eta on a restock, but I’ll keep you posted! Thank you

 

[NHCivicGuy]

Restocked!!

 

[acurax]

So, looking at the wiring diagrams, it looks like you may be able to tap into the brake light signal wire for all brake lights on connector C224, position 10, which is located behind the passenger side footwell kick panel. I confirmed this the same across all trims for 2024. Which might be easier than installing at the high mount brake light location. Take a look at these images and let me know if that's accurate or if more information may be needed to confirm.

 

[TacoShop]

Restocked!!

Ill take one for the type s!

 

[NHCivicGuy]

So, looking at the wiring diagrams, it looks like you may be able to tap into the brake light signal wire for all brake lights on connector C224, position 10, which is located behind the passenger side footwell kick panel. I confirmed this the same across all trims for 2024. Which might be easier than installing at the high mount brake light location. Take a look at these images and let me know if that's accurate or if more information may be needed to confirm.

That would be very nice! If you could PM the connector photos or part numbers, if you have a way to get that? I’m really curious to see what connector it is, and if it has both power and ground, as the diagram only seems to have 1 and my module requires both.

Sponsored