What did you do to your Integra Type S today? 🙋🏻‍♂️

[gohan408]

Awesome, I’ve been looking at this steering wheel. Can you post back when you install it?

Absolutely!

Sponsored

 

[bpebler]

your car looks great. Is there any noticeable sound difference with the turbo pipe?

Thanks! So it’s been wet for several days & they salted the roads so I haven’t taken it out yet. Tomorrow tho. All I did was a couple revs but the hood was open & I was in the garage so not a really good environment to be able to confirm. I also have one of the Sprint air filters in there now, but I do think the 2 combined makes for a different sound. I just need to get it on the road to be able to confirm. PRL HVI intake should be available in 1-2 months which would affect the sound a lot more. The Pipercross intake sounds amazing too.

 

[gemini19]

Did just a few things. Changed the oil & rotated tires. PRL Turbo inlet pipe & turbo blanket. StickerFab drl overlays, CF fuse box & wireless charger cover, shift knob & painted bezel - not really happy with finish, just piano black Hyperdip with a gold “S” - think I’ll just use the SEL trim ultra black in the spring on it. Got a cool dash cam for Christmas!

Still need to get 27won FSB & RV6 RSB on with the rigid collars.

Where did you get the CF fuse box cover?

 

[gohan408]

Thanks! So it’s been wet for several days & they salted the roads so I haven’t taken it out yet. Tomorrow tho. All I did was a couple revs but the hood was open & I was in the garage so not a really good environment to be able to confirm. I also have one of the Sprint air filters in there now, but I do think the 2 combined makes for a different sound. I just need to get it on the road to be able to confirm. PRL HVI intake should be available in 1-2 months which would affect the sound a lot more. The Pipercross intake sounds amazing too.

look forward to an update. youtube said the sprint/spoon filter makes the most noise

 

[bpebler]

Where did you get the CF fuse box cover?

StickerFab. It’s just a vinyl overlay. But quality & fiber woven in the same direction as the valve cover & heat sink ??

 

[bpebler]

look forward to an update. youtube said the sprint/spoon filter makes the most noise

I have both the standard & race version Sprint filters & use the cheaper one now. Can’t tell a sound or power difference whatsoever & way better filtration. I’ll have to take some closeup pics of the race version. It’s crazy how open it is. The Pipercross sounds incredible though!

 

[kjechel]

Although I have a spare tire in my trunk, I thought it would be useful to also have the Air Compressor in there as well. I carved out a space in my trunk for the Compressor, but first I removed the bottle of Sealant (I'll use that space for something useful, like a tire plug kit). The Compressor works just fine like this.

Then I removed the Load Floor and the Foam under it and cut out a section like this using a Stanley Knife followed by a serrated kitchen knife for the deeper sections.

The cut out section is 7-1/2" wide by 7-3/4" high (front to back direction).

The Compressor fits like this

and looks like this with the Load Floor reinstalled. It's the perfect thickness to support the Load Floor directly over it when closed.

 

[meki22]

Didn’t do anything to the Type-S but I did add 5HP to my new folding table.

 

[gohan408]

As promised. pretty easy install. I did have to re-center it a few times.

holding the flat bottom feels better than the perforated leather imo.

Awesome, I’ve been looking at this steering wheel. Can you post back when you install it?

 

[rody26]

As promised. pretty easy install. I did have to re-center it a few times.

holding the flat bottom feels better than the perforated leather imo.

That looks awesome. Going to be on the list of mods I have to do. Thanks for sharing the images.

 

[Brodgo27]

Got on my Overland Designs Alcantara cover + Raceseng Shift Knob + Acuity Shift Boot Collar today. Loving the look!

 

[nix6speed]

In CGI land at a stoplight today a new Mercedes E63S with paper tags was next to me. After catching the driver off guard and making it to the golden second gear still ahead I was certain nothing could beat a vehicle that pulls nearly as hard as a BMW M2. In only a few seconds I was proven wrong as it blew past me several car lengths. My driver mod attempts proved futile and there was no chance of redemption. The real travesty here is I didn't get a chance to catch up to provide any lame duck excuses for the embarrassing loss or explain how my FICO score is probably higher than theirs. Next time.

 

[Frenzal]

Did this last fall and forgot to post... Added protection for the radiator and intercooler.

In real life, it is almost not visible. Should've used black ty-raps instead of white, but didn't had them when I did this. But again, barely visible in real life.

 

[hypersss]

Did this last fall and forgot to post... Added protection for the radiator and intercooler.

In real life, it is almost not visible. Should've used black ty-raps instead of white, but didn't had them when I did this. But again, barely visible in real life.

I’ve been thinking of doing something like this. Did you remove the bumper to install it?

 

[kjechel]

I’ve been thinking of doing something like this. Did you remove the bumper to install it?

I did something similar, but just the lower portion with this grill material

and used these black epoxy-coated stainless steel tie wraps to secure it

Here's what it looks like from the inside

so yes, I had to remove the bumper. It's not too bad if you have a helper.

Sponsored