Izumo_Teggy
New Member
- Thread starter
- #1
Sponsored
Before and after remark link loop exhaust install
- Thread starter Izumo_Teggy
- Start date
- Watchers 1
OP
OP
Izumo_Teggy
New Member
- Thread starter
- #2
Oh man i didnt check before posting but the order of the clips got messed up during upload… it should have been clip 1,3,2, then 4.
So far it sounds a whole lot better with the catback on. Upshifts from 1-2,2-3 has this nice burble and backfire. In 2nd and 3rd letting off the gas around 3k rpm has backfires and burbles all the way down to 1500. No drone on the highway at 76 mph around 3k rpm. Interior sounds just a bit louder than stock with no real roughness until u give it the beans.
Great exhaust overall, easy install other than getting the stock exhaust off the hangers, and the remark supplied bolts was missing 4 nuts. I remedied that by just using the stock nuts since they were the same thread size.
So far it sounds a whole lot better with the catback on. Upshifts from 1-2,2-3 has this nice burble and backfire. In 2nd and 3rd letting off the gas around 3k rpm has backfires and burbles all the way down to 1500. No drone on the highway at 76 mph around 3k rpm. Interior sounds just a bit louder than stock with no real roughness until u give it the beans.
Great exhaust overall, easy install other than getting the stock exhaust off the hangers, and the remark supplied bolts was missing 4 nuts. I remedied that by just using the stock nuts since they were the same thread size.
Similar threads
