Baozzer 2024 A-Spec Tech 6MT

[JC-RH]

sorry I thought I had been replied, I DO NOT RECOMMEND THE ACCORD ROUTE. If you search eBay for "2022 Honda Civic mirror" look for images for ones with home link. A lot of the listings do not include the part number but this one is T20-A11. Good luck!

I bought mine for $100 and the listing did not specify the mirror had home link or the part number. I've found used listing for the correct part number for about $200. Happy searching

I actually ended up buying an +2022 MDX one shortly after my post to you. I found it on eBay for $80 shipped. Since the glass was chipped, I swapped it out for the Integra glass. Also had to mod the inner side of the glass.

I did a small write up and posted in one of the Homelink threads.

Sponsored

 

[LyonIV]

New exhaust tips on stock exhaust
I went with 4” slanted double walled tips. Asked for the tips to be extended out to the edge of the diffuser. Came out great didn’t want a droney and loud car.

I like the look of the 4in exhaust tips. I have a downpipe with the stock exhaust but I wanna change out the tips also. What inlet diameter did you need to get?

 

[Baozzer]

I like the look of the 4in exhaust tips. I have a downpipe with the stock exhaust but I wanna change out the tips also. What inlet diameter did you need to get?

I believe you need 2.25 but I couldn’t find any and ended up paying extra to fit the 2.25 stock pipe into a 2.5 inch tip

 

[LyonIV]

I believe you need 2.25 but I couldn’t find any and ended up paying extra to fit the 2.25 stock pipe into a 2.5 inch tip

Sweet thank you

 

[Baozzer]

Floor and trunk sound deadening

 

[Baozzer]

BBK (DC5Creations)

 

[lnf]

The DC5Creations kit is a new one for me! I thought that the only way to add Brembos was by doing the Hyundai Genesis/Stinger Brembos and 3-row rouge rotors.

Your DC5Creations kit looks like the rotors fit the TL Brembos much better. I think you may have just helped me pull the trigger!

Did you supply your own rotors and pads?

 

[Baozzer]

Yes it’s because these are stock TLS calipers and TLS rotors. Keep in mind TLS rotors are 310 mm and the stock Integra are 312. So technically smaller. The genesis/rouge retro is 320. They work. But you need to be confident in your work because the bleeders and replacement parts used in the TLS remanufacture are low quality. Leaking bleeders and pads did not fit I had to sand everything down. If I could do it again I 100% would go 27won for better clearance and better install.
I have 0 braking issues. Do I feel an improvement? Absolutely not. Do I like the look? Yes.

Sponsored