• Welcome to Integraforums.com everyone!

    If you're joining us from CivicX.com, then you may already have an account here!

    As long as you were registered on CivicX.com as of May 24, 2020 or earlier, then you can simply login here with the same username and password!


Sponsored


JC-RH

Senior Member
First Name
Javier
Joined
Jun 30, 2022
Threads
18
Messages
356
Reaction score
292
Location
Miami, FL
Car(s)
2023 Integra A-Spec Tech 6MT
Love the drop, but it needs spacers desperately.
 
OP
OP
vicembn

vicembn

Member
First Name
brandon
Joined
Nov 5, 2022
Threads
3
Messages
23
Reaction score
21
Location
Tennessee
Car(s)
2023 acura integra
Love the drop, but it needs spacers desperately.
Also, we’re your springs noise free as soon as they were installed or did they take a little “setting In” before they got noise free ? I’d appreciate the help
 

JC-RH

Senior Member
First Name
Javier
Joined
Jun 30, 2022
Threads
18
Messages
356
Reaction score
292
Location
Miami, FL
Car(s)
2023 Integra A-Spec Tech 6MT
Noise-free from the start. If you’re having noise, make sure everything is lined up correctly and all bolts are torqued. The install is 80% of it.
 
OP
OP
vicembn

vicembn

Member
First Name
brandon
Joined
Nov 5, 2022
Threads
3
Messages
23
Reaction score
21
Location
Tennessee
Car(s)
2023 acura integra
I’m having a good bit of noise when turning so I’m gonna check everything.
 

submitaweasel

Senior Member
First Name
Sean
Joined
Nov 3, 2022
Threads
6
Messages
465
Reaction score
230
Location
Ohio
Car(s)
2023 Integra M/T
I've had the same issue with lowering springs in the past. I know coilovers are harder with this platform because of the adaptive dampers....but a good set of coilovers would ride better than stock anyway with the nice lowered ride height. The aftermarket will still take some time to make the good set but it will end up being a product.
 

JC-RH

Senior Member
First Name
Javier
Joined
Jun 30, 2022
Threads
18
Messages
356
Reaction score
292
Location
Miami, FL
Car(s)
2023 Integra A-Spec Tech 6MT
I’m having a good bit of noise when turning so I’m gonna check everything.
Did you finally get the noise sorted out?
 
OP
OP
vicembn

vicembn

Member
First Name
brandon
Joined
Nov 5, 2022
Threads
3
Messages
23
Reaction score
21
Location
Tennessee
Car(s)
2023 acura integra
Yes I fixed the noise, I just checked the torque on everything, And added a little bit of grease to the top hat that connects to the strut, as during Install most of it rubbed off. Noise is now totally gone 👍
Did you finally get the noise sorted out?
 
OP
OP
vicembn

vicembn

Member
First Name
brandon
Joined
Nov 5, 2022
Threads
3
Messages
23
Reaction score
21
Location
Tennessee
Car(s)
2023 acura integra
I like the stance on this! Debating getting these or tiens…
These give a great ride quality for lowering springs, as for tein I didn’t see anyone give a good review, so I went with eibach
 

Tegra808!

Member
Joined
Sep 2, 2022
Threads
1
Messages
28
Reaction score
29
Location
California
Car(s)
2023 Acura Integra Aspec
These give a great ride quality for lowering springs, as for tein I didn’t see anyone give a good review, so I went with eibach

whats the wheels gap with the sportlines and is the tires tuck slightly?Any side shots?

Also, when installing the front springs, any problems with the axles popping out?
 

Tegra808!

Member
Joined
Sep 2, 2022
Threads
1
Messages
28
Reaction score
29
Location
California
Car(s)
2023 Acura Integra Aspec
Eibach Sportline springs
(part # E20-40-036-02-22)
(From 10th gen civic si)


also installed rear camber kit to minimize natural camber from the drop.
(Skunk2 2023 Camber Kit)
(SKU: 516-05-1605)

BD0C4B32-8030-49F3-B6E2-42955BCB6906.jpeg


6F3AA346-1441-4A32-A7E7-810E401BE29A.jpeg
Are those the stock springs (blk)? I thought Eibach Sportlines where red springs?
 

Nycvic

Member
First Name
Vic
Joined
Jan 16, 2023
Threads
3
Messages
22
Reaction score
15
Location
NYC
Car(s)
2023 Acura Integra A-Spec 6MT
Love the look. Going to order my Eibach lowering springs soon!

I saw comments about spacers, what size spacers you going for? And would there be a possibility of needing longer studs to ensure proper tightening of the lug nuts?
 
 


Top