Sway Bar Upgrade

[Dakei]

I've been thinking about upgrading my sway bars. Should I do both front and rear or is a 22mm rear sway bar upgrade enough to reduce the understeer?

Also any recommendations for end link upgrades?

 

[Integra23]

I did the rear only with the white line 22 mm rsb and Honda Accord end Links. For the front I replaced the soft springs with FK8 stock springs

 

[SeanIsElsewhere]

I did the rear only with the white line 22 mm rsb and Honda Accord end Links. For the front I replaced the soft springs with FK8 stock springs

Do you like the feel of the 22mm? How is it for daily driving? Would you ever suggest 25mm for daily driving?

 

[Integra23]

Do you like the feel of the 22mm? How is it for daily driving? Would you ever suggest 25mm for daily driving?

Not sure I saw much of a change. I did it with in the first 500 miles. Biggest improvement I saw was with the springs

 

[SeanIsElsewhere]

Not sure I saw much of a change. I did it with in the first 500 miles. Biggest improvement I saw was with the springs

Right on. Thank you for the insight!

 

[Dakei]

I did the rear only with the white line 22 mm rsb and Honda Accord end Links. For the front I replaced the soft springs with FK8 stock springs

Are the Accord end links actually a 1:1 replacement?

 

[Integra23]

Are the Accord end links actually a 1:1 replacement?

Yes they are. Part numbers for everything I bought for springs and rsb

Honda Spring L Front 51406-TGH-A02
Honda Spring R Front 51401-TGH-A02
BHR97Z Sway bar - 22mm
Honda Accord sway bar links( factory are composite plastic) 52320-TLB-A00
Civic brackets 5238-TGH-A00

 

[toffo]

Yes they are. Part numbers for everything I bought for springs and rsb

Honda Spring L Front 51406-TGH-A02
Honda Spring R Front 51401-TGH-A02
BHR97Z Sway bar - 22mm
Honda Accord sway bar links( factory are composite plastic) 52320-TLB-A00
Civic brackets 5238-TGH-A00

@Integra23, can you tell us a little more about your experience swapping to the FK8 front springs?
I'm thinking of doing this to my A-spec Integra and I'm wondering about how big the tradeoffs are when it comes to ride comfort vs. cornering stability.

 

[Integra23]

@Integra23, can you tell us a little more about your experience swapping to the FK8 front springs?
I'm thinking of doing this to my A-spec Integra and I'm wondering about how big the tradeoffs are when it comes to ride comfort vs. cornering stability.

I loved it. Firmed the front end up and kept the ride height the same. Its firmer but no bounce. I just like the confidence when driving over rail road tracks and coming off of high curbs/driveways and not bottoming out the car.

 

[toffo]

Dope, I'm going to try getting that done before summer rolls around. The ride is great until I push it a little more on a canyon road and so I'm looking for ways to increase stability and reduce roll a little too.