PRL Black FMIC w/ High Volume Hot Side.

[enjay4553]

Yes, it makes a difference. Decreased IAT by about 70 degF based on my OBD2 Torque app. I push her hard so I can get to work quicker. /s

 

[Baozzer]

guess i need to buy the black one!

 

[enjay4553]

guess i need to buy the black one!

Ugh lead times on the black powder coated are around 2 months. I will say that she seems to build boost significantly quicker. I am holding off on additional mods so I am not forced to perform the new clutch mod.

 

[Baozzer]

i mean aside from an upgraded turbo or map 3 on phearable you shouldnt need a new clutch. but for $50 it def seems worth it for a black intercooler

 

[enjay4553]

If anyone is interested in the titanium inlet without upgrading the intercooler I have extra PRL parts I'd be willing to part with at a significant discount. Basically, pay shipping and it's yours. I may make a formal post otherwise just PM me if it's allowed per the mods.

 

[enjay4553]

i mean aside from an upgraded turbo or map 3 on phearable you shouldnt need a new clutch. but for $50 it def seems worth it for a black intercooler

Also upgraded the silicone and hard pipe to the throttle body. I think that's a requirement for the upgrade. I'd have to check my "impeccable" notes.

 

[enjay4553]

If anyone is interested in the titanium inlet without upgrading the intercooler I have extra PRL parts I'd be willing to part with at a significant discount. Basically, pay shipping and it's yours. I may make a formal post otherwise just PM me if it's allowed per the mods.

PRL also did not send me tracking so after 2 months it was a pleasant surprise when FedEx delivered to my door. I'd say it's almost twice the size of the stock arrangement. Very heavy but it fits perfectly. The biggest pain in the ass was making sure the piping was aligned prior to tightening everything down. Bumper removal is cake if you've already been there.

 

[Baozzer]

nah the charge pipes are optional.

 

[enjay4553]

Do you want my inlets? Just pay shipping. If you're not upgrading the piping you wouldn't need them. Or if you do order you'll get them anyway. I suppose it's a moot point.

Here's another thing I ran into...so I have the HV intake from PRL and the baffle box at the bottom drivers side is no longer required. Rip that shit put. I guess it's where you'd install the plug they offer. Weight reduction.

 

[Baozzer]

PRL also did not send me tracking so after 2 months it was a pleasant surprise when FedEx delivered to my door. I'd say it's almost twice the size of the stock arrangement. Very heavy but it fits perfectly. The biggest pain in the ass was making sure the piping was aligned prior to tightening everything down. Bumper removal is cake if you've already been there.

mine only took a few weeks