Integra Type S exhaust tip upgrade

[levil]

Hi All,

I'm looking to keep my oem exhaust setup but just wanted to upgrade the exhaust tips. I'm having troubling finding the diameter of the inlet and outlet. I'm getting mixed information from google. Also, I believe the center exhaust pipe is larger than the 2 side exhaust pipes.

any help would be great! thanks in advance!

Sponsored

 

[UWU-mancer]

You’re gonna want to just measure the outside diameter and just round it down a hair

I heard (or maybe read?) it’s 2.4” in the center pipe and 2.25” on the sides but I’ve never actually measured it myself

 

[levil]

You’re gonna want to just measure the outside diameter and just round it down a hair

I heard (or maybe read?) it’s 2.4” in the center pipe and 2.25” on the sides but I’ve never actually measured it myself

Thanks. I read 2.5" center and 2.25" on the sides. I also never measured it myself. Thanks for the feedback!

 

[manhole17]

I’m showing 2.25” for the outside and 3” for the center… took these measurements right behind the exhaust tips. The center pipe is 2.5” where it comes out of the muffler, but has a megaphone shaped extension from there to the tip. Please excuse the mess around the last photo, the exhaust sits behind my desk lol

 

[levil]

I’m showing 2.25” for the outside and 3” for the center… took these measurements right behind the exhaust tips. The center pipe is 2.5” where it comes out of the muffler, but has a megaphone shaped extension from there to the tip. Please excuse the mess around the last photo, the exhaust sits behind my desk lol

perfect! thanks for measuring!

 

[BIRDE5]

I’ve started to look into this myself. I’m gonna pair a tip swap with a Vibrant 1793 resonator in place of OEM.

Please post pics when you’re done!

 

[levil]

it was raining last weekend so i didnt get a chance to take proper pictures and video of the sounds. here is the resonator swap, I'm using Vibrant ultra quiet 1141 2.5" and then the tips, i got from Ali express black titanium tips (center tip was 77mm to 114M and side tips were 60mm to 114mm). you can technically go smaller for ID because once you cut off the OEM center tip, the pipe is smaller than 3". the great thing is NO DRONE from the resonator swap. it did get slightly louder but not all that noticable.

 

[manhole17]

Post a clip. That looks sick

Sponsored