M4tst3R
New Member
I'll have the following at the ready:
low profile Ramps
Floor jack
(2) jack stands
Breaker bar
36mm socket
Spring Compression kit
Metric Pass thru socket set
Metric Hex Bit socket set
Strut Splitter
10mm to 22mm socket set
Various socket wrenches
torque wrench 20 to 260 ftlb
Any other suggestions on tools?
Also, is it wise to replace any loosened bolts or nuts? If so, any easy way of finding the part numbers and any suggested part sites to buy from?
Appreciate your time!
low profile Ramps
Floor jack
(2) jack stands
Breaker bar
36mm socket
Spring Compression kit
Metric Pass thru socket set
Metric Hex Bit socket set
Strut Splitter
10mm to 22mm socket set
Various socket wrenches
torque wrench 20 to 260 ftlb
Any other suggestions on tools?
Also, is it wise to replace any loosened bolts or nuts? If so, any easy way of finding the part numbers and any suggested part sites to buy from?
Appreciate your time!
Sponsored