Search results

Read a couple of posts that people had leaks from transmission at inner CV after putting on the springs. I took the precaution of removing the axle nut so it wouldn’t come out.. glad I did because the amount you have to work it, to get strut out I can see how inner CV would easily pop out.

redneck way I did them :cool:

thanks for the post..

Welcome to the club... I to at first was NOT going to mod my ITS as it seemed perfect. been upgrading all my cars since I was a teen. BUT..... the itch started and BOOM now it's quicker and easier to tell someone what I have NOT modded rather than what I have done.

The whole reason I wanted to duplicate the “maintenance mode” without the Autel tool was so I wouldn’t break any seals. Especially with the wind back tool with motor off. You can wind it back to far and your caliper is toast. At least this way the using the motor it won’t go back further than...

I know there have been a lot of discussions about which model Autel and such can you use to put the rear parking brake in servicing mode.. Well, I figured out you don't even need a maintenance mode or even a windback tool. While this worked fine for me be cautious and use this method at your own...

I have actually been driving it more in sport mode recently. Has some nice natural burbles in sport mode that are subtle but definitely there. Not like the pops from the ECU retarding the timing to produce in sport+. cant change anything with the locked TSP tune but probably going to a custom...

Technically, the bottle says leather & vinyl coating……. ?

Yup took that pic today. Adams ceramic has UV agent in it so you can use a UV light to see where you missed when Applying it. I guess it’s time to use the light again and see how much has actually worn off. Might need to re-apply at least on driver seat and armrest. ?

I ended up using the Adam ceramic leather coating. Worked great. ? wipe it down once every couple months with Adams leather & interior cleaner with microfiber towel and 19 months later still looks brand new.

Running TSP stage 1 tune which is locked so I can’t adjust the burbles. Of If I do pull trigger it on turbo, injectors and HPFP then I will have to get custom tune.

I am on the fence of selling or not as it is a little more intense than anticipated. it was installed with the resonator not straight pipe. Curious on others perspective about the sound.

Some questions and most videos don’t have in cabin sound during driving so I made the vid that has a mix of modes with windows up and down to better understand the sound variation with this exhaust.

mine was 100% the metal ELS grill..

No drone AT ALL with MBRP in comfort mode.. Valved exhuast us way to go IMO and very minimal drone with valve open in sport and sport+ at highway speeds.

Correct it does not have the "little" muffler on the middle tail section like the stock does. I would say Comfort with MBRP is like Sport with stock in volume level but the tone itself is a little different. Highway drone is very mild compared to what I thought it would be for aftermarket...

I know I have been MIA for a few months and have definitely missed driving my Type-s. However I finally got to install my MBRP exhaust that has been sitting in my garage since November. Below is the install video with some surprising comparisons with the PRL front pipe TSP downpipe and Stock...

I guess it would work fine. It does have a cool little red float in the check window. Only concern would be it doesn’t state the cap pressure. Think my Mishi is 1.3 bar. let us know how it works!!

Someone on this board told me I could not install springs at home by myself without a lift. I have looked and can't find the specific comment, but my video below is the rebuttal. Not click bait just proof I did the install on jack stands at home without fancy shop tools.

seeing this a little late.. here is a link from acurazine that has all oem add on install guides. Integra 2023-2024 Acura Integra Model Series Accessory Installation Instructions - AcuraZine - Acura Enthusiast Community Once I clipped everything back in, I noticed the plastic clip-in rear...