Search results

Bars are solid and heavier. RSB is wider diameter and FSB is same diameter as OEM.

Can’t say which piece added the most noticeable difference since we installed a bunch of other suspension mods at the same time but front sway bar isn’t easy since the front subframe needs to be dropped. The stiff plate and collars were easy to install compared to the front swaybar. The best...

I jumped at Humza’s offer at trying out the SDI E-Click. Was debating between the DSC and the E-Click but after chatting with Humza and how easy it was to switch settings on the SDI I ordered the SDI unit. Took a little over two hours to install with a friend and was able to mount the pod...

Can confirm that the Spoon stiff plate, collars, F&R swaybars, front endlinks and motor mounts from FL5 fit.

Local DE5 owner in Vancouver, Canada area had his seat warrantied for creaking driver seat a while back. Dealer stripped the seat foam out and replaced the plastic piece underneath causing the noise. Might want to reach out to Andy of Ziptie Tuning on youtube/IG who had it warrantied...

You need to reset the PCM/ECM and then adjust the screw to the wastegate actuator to read between 1.27 to 1.43. Volts. They probably removed the EWG from the turbo when drilling out the broken studs. At startup, if voltage is not between that range the car will throw a P003A DTC and can’t...

There is a heated wire that runs in the wheel itself. Need the button and wiring. Not sure what you need since my Canadian spec car came with the heated wheel. Just notice someone already posted the parts needed to convert to a heated wheel.

No heated option for Mugen wheel. Had to move all the trim over from OEM wheel. Some steering wheels like the Carismo have heated option, but not Mugen.

Installed a Mugen steering wheel today. Looks and feels great.

I wanted the flat picnic table look instead of the curved. I’ll probably switch out the Artwork lip spoiler back to the black OEM spoiler since it probably is disturbing the airflow under the APR wing.

Didn’t weigh it on a scale, but installed it myself and definitely lighter than stock.

Picked up my Seibon hood yesterday. Hood looks great and it was packaged nicely without any damage. CF weave and clearcoat looks good without any visual defects. Fitment and gaps are even and install went smoothly. Need to install the hood latches next. Thanks to Josh from Meraki Autoworks...

Unfortunately, the APR holes are in different locations, so will have to drill new holes for the hardware. The new holes sit further forward than the Artwork holes.

I have not noticed the front splitter sagging or pulling down over time. I recently switched out to an APR splitter and the weight different is huge between the two.

The best looking 18” I’ve tried for the DE5 are the CE28 CR2’s in 18x10 et+40 spec and can’t go wrong with G025’s either. MF10’s and TE37 Saga S+ in 18” didn’t look right IMO.

Haha…shipping is gonna be a hassle and tariffed coming from Canada. The APR lip and Artwork kit actually looks decent. The Artwork rear diffuser definitely looks good and I’ll make it work with the APR rear bumper spats. I might have to take off my V2 spoiler and put stick one on since it...

Some pics taken at Hondafest NW this past weekend. Changed up Artwork kit to APR front splitter and 250-GT 67” wing. Sideskirts are backordered from APR at the moment.

I installed my interior Jogon pieces during the winter and the cold temps made some of the pieces come off. I even wiped everything with 50:50 alcohol and water. I had to use some 3M adhesion promoter on the window switch pieces and the rear cup holder. Shouldn’t be a problem installing in...

Thanks. Emira isn’t mine unfortunately. The FK8, DE5, and S15 are the toys. Wife says I can’t have anymore unless I sell one or trade one in. Having too much fun with the builds. Will probably sell the parts on the FK8 and trade it in on something next year. Just need to complete the...

Got the S15 Spec R delivered 3 months ago from its homeland. Added the Nismo aero kit, Aero23 Ganador style mirrors, 78 Works headlights and tail lights, Yashio Factory parts, and a work in progress still.