I am also intrigued, but I will say I'm a little put off by that guy and his website.
He specifically says to not follow the Hybrid Racing instructions, but he doesn't really provide any alternative instructions for his kit?
Closest I could find is this:
...which just seems like a rant and...
You already have a car with a really, really good setup. The Acuity shifter does wonders for getting rid of slop.
Based on your other thread, it looks like you didn't muck with your detent springs. @ashmostro tried doing the lateral detent spring combined with the Acuity upgrades and didn't...
Get a different car with a longitudinal layout, direct trans-mounted shifter, and get a high-end shifter for it.
I'm serious, this is the wrong car for that.
An interesting tidbit I picked up today - the new Prelude uses the CTR suspension and brakes, which I would assume means that it uses the CTR bolt pattern.
I looked it up and the wheels for the Prelude are a 19x8.5, factory wrapped in 235/40R19. That's actually a good bit taller of a tire than...
I used McGards on my BBS wheels. Very excellent, high quality lug nuts with an integral washer for consistent torque.
BBS even has a private label version of them that they sell (with a BBS markup!) but if you don't need the BBS logo, McGard branded ones are the exact same thing.
They have...
You'll have to turn the volume WAY up on this, but for anyone on the fence about it, give this a listen:
I wanted to capture the sound of that car as purely as I could and I didn't want the audio to clip or be normalized/compressed, so that's why you need to turn it way up.
The sound that...
If I had the garage space, I'd probably have a GT350 in the stable again.
If you're a fan of high revving Honda engines with torque curves biased towards high RPM, the GT350 is basically that.
It's unhinged and awesome.
Just don't pretend it's something it's not.
It's a step on the spectrum towards having the car do 100% of the driving for you, and it replaces driver involvement.
If you're arguing to the contrary, you're just doing mental gymnastics to cope.
BuT iTs bEtTeR aT dOiNg iT tHaN yOu WiLL eVeR bE -...
By this logic, DCT is god-tier.
Auto rev-match is there to help you do something you're not good enough to do yourself. You can argue whichever way you want about it, and cope however you need to, but the reality is that it's one step removed from having an automated clutch pedal, and two...
I actively tried to feel a difference, and I can't really say that there's one for sure. So that's how minimal the difference is with vibrations, if there is one. I actually think that Honda did this to further nerf the clutch to protect against the lowest common denominator rather than for...
They are intended to stop novice or abusive drivers (but I repeat myself) from causing damage to warrantied parts.
They do this by making the driving experience much worse for experienced drivers.
The process is reversible, I would highly recommend buying a spare clutch slave cylinder and...
Indeed, I just posted a how-to on this yesterday.
Regarding rev-hang in general, there are a few ways to drive "around" it.
One thing to be aware of is that your car has a sensor on the clutch pedal that tells it when the pedal is all the way to the floor. On some cars at least, this sensor...
About six months ago, I did the clutch delay valve (CDV) delete and the clutch master cylinder damper (CMC damper) delete at the same time on my Integra Type S. If you have a non DE5 such as an A-Spec, I'm not sure if your car has the same CMC damper, but it definitely has the CDV and the steps...
The face of the Type S is pretty spot-on, IMO.
Car makers are beholden to the almighty Gantt chart though, and any time they've got a good thing going, they also (necessarily) have a plan to destroy it. Unless you're the immortal Chevrolet Express van.
I put the odds at 5:1 that most of us...
I mean it's not necessarily overkill if you're tracking it.
If you aren't tracking the car, I'd probably just run one weight all year long and extend that interval.