Sponsored


Search results

  1. HOMELINK

    Be careful admitting that around here, or some cringelord with a degree from a Facebook group will show up and claim that Homelink of all things is somehow gonna draw too much power for an 18GA wire to handle. 😁 Glad you got it sorted.
  2. HOMELINK

    False. The harness that runs through the stem is the same, and the plug inside the mirror clamshell is the same. This is why you can use the stem/mirror harness harvested from an Integra in a Homelink mirror from an Accord. The reason that the Homelink module has a separate power wire is not...
  3. HOMELINK

    Sent.
  4. HOMELINK

    My video addresses these things directly. I can send it to you if you like.
  5. HOMELINK

    Okay let's diagnose this point by point: "properly ground the mirror" - the mirror is already properly grounded. If it weren't, it wouldn't power on. This isn't household wiring - cars don't have separate return paths. "ensure all power connections and thresholds are correct" - the yellow...
  6. HOMELINK

    08V03-3A0-100 (your first link) is the correct mirror to get if you want a frameless one. Commonly referred to as the "Accord mirror". 08V03-30A-100 (your second link) is a harness that you can use to run power to the Accord mirror through your A pillar. Using that harness, IMO, is not the...
  7. Lug Nuts

    Really cheap set of McGard lug nuts. https://www.ebay.com/itm/267375501910 They're actually OEM Lexus, so the locks have a tiny "F" logo lasered onto them.
  8. PURE Digital Factory Infotainment Integration for ELS Studio

    Maybe even a better/cheaper option, if the factory amp has a flat mounting surface, would be a laser-cut plate with holes that match the factory ones and that match your enclosure's mounting tabs. SendCutSend could even make a quantity of them for you with reasonable pricing. ETA: haha you...
  9. PURE Digital Factory Infotainment Integration for ELS Studio

    Yeah it really depends on what wires they're moving around, and the connector staying the same.
  10. PURE Digital Factory Infotainment Integration for ELS Studio

    I do wonder how much is truly different. Ford does something similar with their harnesses, and it'll be 98% the same but for a few pins. If they're overwhelmingly similar, it might be a good idea to explore a configurable board with jumpers or DIP switches. But you'd have to know what the...
  11. PURE Digital Factory Infotainment Integration for ELS Studio

    This is going to be highly variable. The spectrum of capability when it comes to this sort of thing goes: Filthy Casual -> Most Shops -> Home Gamer -> Specialty/Premier Shops -> The Obsessed Hacker Notice that you don't find people doing it professionally at either end of the spectrum. On...
  12. HOMELINK

    Nah. Not doing this. Continue to argue duplicitously and in bad faith with someone else, you're going on the ignore list.
  13. HOMELINK

    No choice to be made here. The Integra's wiring harness isn't populated on the pin that goes to the wire for Homelink power. So you're splicing into the power for the auto-dimming and living with the way the car decides to energize that component. Therefore, switched with igniton only.
  14. HOMELINK

    No, I'm not in my driveway. I'm opening that sucker 200ft down the road because I don't want to sit and wait in my driveway for the door to open. It also works immediately when the ignition switches on, so when leaving the garage I don't have to wait for the infotainment to boot up and connect...
  15. HOMELINK

    I am generally turning against traffic to get into my driveway, and keeping an eye out for cyclists, kids, pets, etc. Fumbling around with the infotainment every single time I do that is the absolute last thing I want to be doing, I can hit the Homelink button without even looking at it.
  16. PURE Digital Factory Infotainment Integration for ELS Studio

    ...two channel digipot and wire it in parallel? It's always something with these projects.
  17. HOMELINK

    Aside from the stem and harness, there's exactly zero difference between the frameless mirror that came in my Integra and the Accord frameless mirror with Homelink, other than the Homelink buttons. They're absolutely identical. Homelink being off when the car is off also isn't unique to the...
  18. HOMELINK

    I actually have a video I'm working on for this. The gist is: you disassemble your Integra mirror and your 08V03-3A0-100 Accord mirror and reassemble using: Integra stem (matches rake of windshield + required length) Modified Integra harness that passes through stem (connector inside mirrors...
  19. Transmission Fluids

    2.5 is a lot, did you have the front of the car elevated?
  20. PURE Digital Factory Infotainment Integration for ELS Studio

    Hard to overstate how much work goes into a project like this. The frustration is real. I pioneered a lot of the "open sourcing" of info around Sync 3 swaps and DSP integration in S550 Mustangs (with help from numerous others) back when a certain other people had decided to try and profit off...


Top