JPx1967
Member
- Thread starter
- #1
I often thought of picking up some sound deadening material for the rear cargo area. Recently I came across a drop in sound deadening kit in my local marketplace for the C7 Corvette. So I messaged the seller on the dimensions of the mats and was surprised that it was very close to the Integra cargo area. There is some pretty good weight to these mats which would explain its sound deadening capability.
I'm actually quite happy with the overall fitment and the best part is it took less than 5 minutes to complete.
I haven't decided whether I'll trim the flaps off or not as they do fold up toward the rear wheel wells and should assist in blocking unwanted road noise.
The smaller mats I just placed over the rear floor mats for now. This car is a one passenger vehicle, so they're not in the way and easily removable if needed.
See attached pics and specs on the mats including installed in the ITS. Unfortunately the car is in storage for the winter, so I can't comment on the results. Will report back in the spring!
BLOCKIT Drop In Sound Deadening Mat For C7 Corvette
• Reduce interior noise in SECONDS! Just drop it in & go!
• Immediately helps reduce tire/road noise & some aftermarket exhausts
• Pre - cut for a perfect fit. No adhesive! Place right on top of your factory carpet.
• Removable. You're NOT permanently gluing down weight.
• Helps reduce heat.
• Has cut outs for the cargo hoops.
• 4 layers of REAL automotive grade acoustical soundproofing materials - FMVSS-302 Tested & approved!
• Each layer is bonded via a unique infusion method which requires no glue & eliminates separation!
• 1" inch thick! Can compress down to 1/8" so you lose no cargo space!
• 3 Piece pre-cut Kit.
• Great for bluetooth. Allows you to have a comfortable conversation. Helps with driver fatigue on long trips!
• Textured UV protected top layer is durable & looks great.
• Made in the USA! Raw materials Are from the USA Too!
• Manufactured under strict ISO 9001-2
008 standards!
I'm actually quite happy with the overall fitment and the best part is it took less than 5 minutes to complete.
I haven't decided whether I'll trim the flaps off or not as they do fold up toward the rear wheel wells and should assist in blocking unwanted road noise.
The smaller mats I just placed over the rear floor mats for now. This car is a one passenger vehicle, so they're not in the way and easily removable if needed.
See attached pics and specs on the mats including installed in the ITS. Unfortunately the car is in storage for the winter, so I can't comment on the results. Will report back in the spring!
BLOCKIT Drop In Sound Deadening Mat For C7 Corvette
• Reduce interior noise in SECONDS! Just drop it in & go!
• Immediately helps reduce tire/road noise & some aftermarket exhausts
• Pre - cut for a perfect fit. No adhesive! Place right on top of your factory carpet.
• Removable. You're NOT permanently gluing down weight.
• Helps reduce heat.
• Has cut outs for the cargo hoops.
• 4 layers of REAL automotive grade acoustical soundproofing materials - FMVSS-302 Tested & approved!
• Each layer is bonded via a unique infusion method which requires no glue & eliminates separation!
• 1" inch thick! Can compress down to 1/8" so you lose no cargo space!
• 3 Piece pre-cut Kit.
• Great for bluetooth. Allows you to have a comfortable conversation. Helps with driver fatigue on long trips!
• Textured UV protected top layer is durable & looks great.
• Made in the USA! Raw materials Are from the USA Too!
• Manufactured under strict ISO 9001-2
008 standards!
Sponsored
Last edited:
