Sponsored


Search results

  1. Added the FL5 Spoiler

    Nice! Looks great!!👍🏽
  2. Added the FL5 Spoiler

    Wouldn’t mind seeing some daytime pics posted up!?!
  3. Added the FL5 Spoiler

    I got the ITS specifically to not have that wing, but have to admit, looks a lot better than I thought it would! Looks clean!
  4. HGHVLTS' Integra Type S Build

    Got the Spoon Springs installed, took it for a drive and feel is so much better in Sport +, almost no compromise in the stock feel of the car, but definitely changed the dynamics of the car! Really liking them. Thanks to @nikw91 for the springs!! So far no rubbing either with the Bonoss Wheel...
  5. HGHVLTS' Integra Type S Build

    Well I would say its as snug as OEM, considering the OEM mounting base is used on these mirrors, kinda weird that it would be rattling so bad?!
  6. HGHVLTS' Integra Type S Build

    Fresh from Blackhawk, Mugen Hydrophilic Mirrors installed! Very easy to install!
  7. HGHVLTS' Integra Type S Build

    Yes, 7 LEDs, two for each door, two for the foot well, and one over the Qi Charger, the one part will take care of all of them, you just need to remove a few of the lenses from the stock LEDs and put it on the red ones.
  8. HKS Suspension Error Canceler Kit

    Haven’t done anything yet, was just going through the car for research.
  9. Sold: HKS Suspension Error Canceler Kit

    I was checking on how hard it would be to put Type R seat belts into the car and found this still plugged into the car. I have no need for it and I wasn't planning on getting coileovers. Hope it can help out someone that plans on getting coilovers or already has them. $420 Shipped to the...
  10. HGHVLTS' Integra Type S Build

    Installed the PRL Intercooler and Charge Pipes, long night. Full Intake system complete! Since I was already there with the bumper off, installed the OEM Illuminated Front Grill Emblem: OEM Copper Rims, Spoon Lowering Springs and Invidia Q300 Cat-back Exhaust on deck!
  11. HGHVLTS' Integra Type S Build

    You could try Ebay to find a Type R armrest or civic armrest that fits. I haven't confirmed, but the stock leather arm rest cover does come off, but I'm not sure it fits on the Type R lid assembly with proper hinge. If you have seen the post here about the Mikstore kit, you can use the stock...
  12. HGHVLTS' Integra Type S Build

    I bought the Mikstore kit prior to finding out about the factory parts being available, so I bought the kit and the factory parts for the vents and charger together. JDMYamato offers all the parts you need to make the entire kit work, minus the charger, and it’s probably cheaper than what I...
  13. HGHVLTS' Integra Type S Build

    Finally completed the rear vent with factory USB-C charging ports. Nothing like Genuine Parts! Photo Op with the new spoiler, liking the profile!
  14. HGHVLTS' Integra Type S Build

    That was the goal, since it’s a daily for me! Just want to be comfortable!
  15. HGHVLTS' Integra Type S Build

    https://extremeonlinestore.com/products/2023-up-acura-integra-rear-spoiler?variant=46396579381418 If anyone decides to purchase, the very middle hole will/should be covered with something as it is no longer used. The plastic clip should be removed as well...or at least I removed it...
  16. HGHVLTS' Integra Type S Build

    Does the exact same thing, the concern lies with the rear vent panel as it needs a ton of trimming and doesn't fit as well as OEM. Being that I bought an entire Type R Console, I ended up using the Type R Alcantara arm rest, I never bothered trying to see if the Type S leather one would fit.
  17. HGHVLTS' Integra Type S Build

    I ended up buying a full center console from a Type R, it isn't as deep as the Type S and allows for the duct to be routed properly. There is a lot involved as I found out as I progressed with the project. Mikstore kit: $260 Type R center Console, Ebay: $210 Parts for the OEM Factory rear...
  18. HGHVLTS' Integra Type S Build

    Some drilling required, but yes! I ended up finding a decent deal on ebay, shipped direct from Japan. Part number 08E16-T43-B01D, https://www.ebay.com/itm/198192716612 . They accepted an offer of $180 Appreciate it, cruise on by whenever!
  19. HGHVLTS' Integra Type S Build

    Fresh From JDM Land, got the FL5 illuminated cupholder and console led lights along with an FL5 Factory OEM Start/Stop Button. Here is some of the process, tried to follow the directions as best I could given that it was directions for RHD. A/C vent section on the dash needs to come off as...
  20. HGHVLTS' Integra Type S Build

    Installed the Extreme Online store factory style extended spoiler. I liked the OEM Carbon Fiber spoiler style, however, I don't want any exterior carbon fiber, I was looking for a gloss black alternative. Was able to get this for $150 shipped, and was one of the very few I could find that is...


Top