Search results

it's unfortunate that this happen to you. I order multiple items from JDM Yamato before including Rear AC parts. Not sure if something change with their logistics or just got hit with bad luck.

rock stuck in between brake shield and rotor causing it scrap and squeal loud. More than likely when you pushed the brake shield, the rock dislodge. Happens to everyone and if it doesn't happen to you yet, you're not driving enough lol.

ok, I was able to remove the clips without breaking them. For future reference for anyone, all you really need is a depinning tool and and angle pick. The depinning tool holds one side while you use the pick to flip the other side opening the clip to slide off.

I wouldn't mind re-ordering, but can't seem to find it. Even trying a google len's search gave me no luck

I hit the dreaded carbon fiber resin peeling and in the process of getting the spoiler remove to get it sanded down and clear coated. I'm having trouble removing these zip tie clips without breaking them. Is it possible to remove or is there a way to order a new set if I go through the route of...

As mention above, I went with F-kit before they came out with an F-Kit with autotilt. You will have to swap out your stock color base with the mikstore kit. Either you have to depin the stock connector since the connector is too thick to slide the rubber grommet and base out. Second option is to...

Also folding mirrors work fine, just people are having issues with the tint function which is different kit you can purchase. Source, I have folding mirrors on mine without tilt function since the JDM mirrors tend to have a wide view, I can see the curb without tilting.

I'm like 99% sure it's just a cap that sits over the stock. You can kind of see it in the picture where the FL5 gloss black mirror cap is sort of peeking out a bit. I was a bit surprised even the Mugen Center console is not a direct replacement as well and just an overlay for the price they...

I almost certain those mugen mirror caps aren't a direct replacement but another overlay with double sided tape. Probably wont need to remove your stock mirror caps

if you're getting the MUGEN HYDROPHILIC mirror you're going to have to pop off the stock one. It's a lot easier to pop off the mirror cap from the inside since there are clips you can push. If not, you can sort of angle the mirror a bit to get a plastic pry tool to push the clips.

dang.. i knew WOT was overpriced but I still bought it since I couldn't figure out what those brackets were called when I was searching for it. If you let the struts do the work and open the hood, does the hood bounce at the end? I'm not sure if it's a WOT struts supplied or it's just the...

was there a difference with V1 and V2? I recall seeing the side skirt awhile ago but V2 looks the same.

I have the tail light rubbing the bumper issue. I read a few people also have that as well probably due to how the corner tail light angles down and vibration scrapes the corner. I ended up just putting touch up paint and cut a small ppf to protect it from rubbing. Another paint issue I had...

kind of hard to tell if the bump is coming in or out but i assume it's the part where it has a paint chip and a bit of rust. Kind of looks more like someone accidentally bump it with a flat head since there it looks like a small gash as well. You can try to call the dealer but you mention it was...

There is a specific way you have to route it so the window can roll. I don't remember off top of my head but best to take the door card off and see where it's getting caught.

All you really need is 1-3 and 7. Realistically you just need 1 and 2 if you have the rest of the parts just laying around. I made quick connects since I didn't want to clip stock connectors but it's not really needed if you have no intention of ever going back to stock.

Price drop before I listed it on ebay slightly higher.

Yeah I did, just didn't take a picture of it. I only made the quick connect just in case if I have to switch back to stock, I wouldn't have to resolder the connectors again. Just curious what happens if you don't reduced the subs down to 2ohms, would it just make the amp run hotter?

Thanks for the comprehensive guide, was able to tackle the subwoofer upgrade over the weekend. I probably should have done a comparison with stock before the upgrade since I can't tell if it was a big improvement over stock, maybe slightly? Can't complain since it only cost $60 and probably a...

Thats why I said 10 and below lol.. Feel barely any bass at that range. Dont want to blast my music high to feel some bass.