Search results

Thank you for the response. I was able to get enough wheel clearance with a 3mm spacer. I used the spacers on the front and back to achieve a uniform offset. with a 3mm spacer I am getting 8.25 turns on the lugs and zero vibration with my hub centric ring. I effectively have a + 42mm offset now...

What wheel spacer are using and how many turns on the lugs are you getting with the 5mm spacer?

I previously ordered a set of 5mm on Amazon for my model S, which so happens to have the same center bore (64.1) as the Integra. Unfortunately It doesn’t look to be available anymore, but if you do a search for 5x120 64.1 bore 5mm spacers online there’s a few options. Here’s some I found on...

how much thread engagement did you have with the lugs? Was the wheel still able to sit on the hub?

Can you please provide a pic, details and supplier of the 5mm rear spacer you are using?

Looking for OEM bronze ITS wheels and seller willing to ship.

yes

Can you post a better pic to get a view on how much poke the wheels have?

Considering using a OEM TL 19x8 wheel on the type S for winter duty. Wheel/Tire is going to sit -14mm inner on the outer position of the wheel but will give me a 24MM more clearance on the inside position. Any thoughts if this will work with a 265/35/19 winter tire? Stock suspension.

I also have a small chip out of the OEM grey wheels. Never hit anything. Warranty denied at dealership.

Fantastic reply. Thank you. Based on the actual height of the 255/35/19 would a 265/35/19 fit ?

Hello, Can anyone confirm if a 255/35/19 tire will fit the OEM 19" ITS wheels? It will be replacing the OEM 265/30/19 due to winter driving conditions. It's approximately .8" taller. Thanks