Search results

1. just thin wire like you can pull out of a CAT-5 twisted pair. I think I mention that (22 gauge) somewhere 2. yes - providing power to a wire that is not there from the source but is needed by the mirror for Homelink 3. no - and no resistor needed 4. there is a completely separate thread that...

Yes, you're splicing the two wires together, but you're NOT doing it by cutting either of them. You can use another wire with both ends' insulation stripped off and then push each end into the back side of the connector so the exposed wire ends touch the contacts of each wire you're jumpering...

a HUGE thanks to @Xcfool and @BKK Jack for ironing out the nitty-gritty details. This answers almost everything I'd want/need to know. question for anyone else out there who has taken this information and installed one for themselves: Has anyone done this with the Acura OEM diffuser in play?

I’m going to be painting my calipers and I need to get my 2023 Integra on jack stands with all four wheels off the car, as the activated paint has a limited window of application time. Anyway, I’m trying to figure out the best & most efficient way to get this beast on four floor stands. The...

Yes. Get P/N 76400-T20-A11 and visit https://www.facebook.com/groups/4542779535742752/posts/5890119301008762/ you just need to jumper the Red and Yellow wires on the homelink mirror's connector

I tried the MiniTool Partition Wizard, per PJK3, over five times and it never worked to be recognized by the Integra's system. I have since used AOMEI Partition Assistant, as noted in this article, and it worked perfectly: https://www.diskpart.com/articles/format-128gb-usb-fat32-0310.html