Search results

I went through this same dilemma recently and wondering how hot my oil was getting on track at the end of each 20 min session. I also didn't want a tacky gauge mounted in the car and found a pretty clean solution in my opinion. I used a Blitz sandwich plate, and a Pivot digital monitor (it's...

Swapped out my brakes for a RZCrew front BBK comprised of AP 9660 ENP calipers and Braking Point 378x36 rotors and Paragon rear 350mm BBk. Endless ME20 front and ME22 rear pads for track use and MX72 pads for daily/street driving.

That was my PB, didn't have a previous to judge off of unfortunately.

So I want to chime in with some extra info on the DSC, but want to state I received a discounted product in exchange for my honest review as well as being a Beta tester. Initially the DSC was pretty firm/harsh, but like Maya said a new firmware update and base file was sent out to me last...

I was on my winter/All season tire (DWS06+) setup on stock wheels at the time and was waiting on my wheels then. I have my Volk wheels with PS4S on and track wheels with 200tw tires now.

I definitely have no regrets either going from PRL to the Infinity Design. Definitely makes makes more power than PRL. Dyno'd and picked up power all the way up and made my all seasons break traction up top on the dyno once it hit 500whp. Couldn't finish a clean run as kept losing traction...

Sale Pending

PRL Intercooler for FL5/DE5 in lightly used condition. Used for 6,000 miles and great for a daily modded driver. Asking $550 shipped in the continental US. Will include the used gaskets and air guide seals. Gaskets still look good and I'd have no issues re-using them.

Update to #263: Vehicle: 2024 Integra Type S Total tuned time: 13 months Tuned miles driven: 7,000 Tuning device(s) used: Hondata Flashpro Tunes used: Phearable DE5 Stage 2, JesterTuned Custom Tune Fuel used: E60 mix exclusively Additional related mods: PRL Intercooler and Charge Pipes...

I don't have a picture at the moment of the harness. The seat harness now come to think of it is only used for the seat position sensor and heater if I recall correctly. The factory heater element is a small white 3 wire plug and a separate purchase from the seat harness. Positive, negative, and...

I did this a few weeks ago just in time for my 1st track day with the car. Ordered an extra seat harness and heating element to keep my OE seat's harness in tact. Added a Bride seat heater for the Stradia III and was able to wire it into the factory plugs and use the factory switch for the seat...

Luckily I spotted the sale randomly by going to the site on Monday. Contemplated for a day and couldn't pass up on the hood vent at $350. Shipping was quoted as $209 for it! They're not too far so selected the will call option and was ready for pickup a couple hours after placing the order...

It's a really great option for the DE5. I was able to pick the exhaust up from Invidia early on and installed it and then had the rear end cerakoted black. I made a flange for the OE muffler section to be able to bolt up to the Invidia piping and swap out mufflers whenever I feel like. I'm in...

Q300 with TSP Downpipe, dyno pull sound clip.

I had one on my 10th gen Civic 1.5t hatch and I have one now on my Integra. Bought one for each of my cars if that says anything. Wunderladen only puts out great products in my opinion.

It uses a combination of double sided tape and your existing holes on the trunk. You could possibly get away with just the double sided tape, but it's nice that it reuses the factory holes in addition to the tape.

The EPR one was unusable in my opinion. The finish was worse than the EOS mentioned by @Underdog. A corner had severely missing coating, glazed patches of finish in multiple spots. I had it clear coated to fix the issues and then when installing it the fitment was way off. The pointy/forward...

I have the EOS gloss black spoiler and the finish matches the OEM gloss black perfectly in my opinion, there's no difference that I can tell. Although, it's shipped in a plastic bag inside a box loosely without padding and the finish had imperfections from rattling around inside the box during...

I may be try and make it out to the next get together. Will be cool to gather with some other DE5s

I'm in the N. OC area myself. Only seen one or two ITS on the road thus far. I'd be down to meet/cruise one of these days, schedule permitting.