Search results

Where you press down is directly on top of the passenger side airbag, but to the left of that spot there is an antenna that's mounted under the dash. That could be a difficult spot to diagnose so I would exercise patience with them. It may be that something is shifting out of position while...

A good source for this type of information is ALLDATAdiy

From what I can find that's not available one it's own. You need to by the whole engine harness. You could try reaching out to Sumitomo who may manufacture these for Honda/Acura to see if they may be able to help you source one?

100% right about the bad, looks like some of those connectors were cut off so not only do you need to find out what the connectors are, you need to possibly extend the wires and then terminate them. That said, I've had good results sourcing connectors and terminals from Corsa-Technic, but...

Check out AllData diy. That said, here are the connector pin outs: Headlights: ANC:

Yes, you need to remove the interior trim panels.

Based on my research the ADX has the splitter as part of the heater unit ( 79106-3Y0-H51). If someone has a 3D scanner and access to a splitter, it would be great if they could create a 3D model of it. I tried using regular photos taken by my phone and some tools that claim to be able to convert...

If you go this route, you should get the gear motor service kit (43012-TBA-A01) since it's inexpensive and convenient while you have the motor removed to wind them back. Unfortunately, I don't see directions on AllData like I followed for my TLX years ago, but you will need an allen wrench for...

I have a TopDon RLink J2534, which is a little more costly ~$230-$270, but still not as much as some other options. Setup was easy on an older laptop that doesn't meet the minimum requirements to run Windows 11, but I installed Windows 11 anyway, and it works with iHDS.

You should be able to deduct the interest unless you make too much money.

Just a thought, but if someone was going for a sort of stealth aftermarket system, what compromises might need to be made? For example, would it be possible to install the 8" subwoofer into the factory subwoofer location? Or, might there be a custom enclosure option that fits into the location...

If you can get mikstore to sell you just the splitter, or you're able to source one elsewhere, it's possible to use 100% Honda original parts for the rest of it. Here's a full list of Honda OEM parts: These parts I sourced from Japan, make sure to select the specified part # from the drop-down...

Tailgate: Fenders:

I think this is the issue, the Soloscan lacks CANfd and Forward Collision Avoidance (FCA) support. That said, I have a TOPDON RLink J2534 and it works with iHDS to clear these codes.

Yeah, it's hard to say what total shipping would be from them. I didn't catch the vent stick caps. I don't think they have those.

Are these the same as what Mikstore sells? If not, how do they differ? https://mikstoreph.com/collections/civic-2022-interior-accessories/products/honda-original-black-ac-knob-replacement Are these the same parts from the JDM FL5 Black Edition? 79624-3W1-C31ZA KNOB SET, DIAL (AUTO) (TEMPLATE...

This is the closest I've found. https://makerworld.com/en/models/1817921-11th-gen-civic-type-r-magsafe-mount#profileId-1940193 Might be able to modify that using Blender to more closely match the one here.

It's possible I'm forgetting something...

Those would have been on the OEM factory installed spoiler. I don't recall them being included w/ the OEM optional CF spoiler when I installed mine and the directions make no mention of reusing them.

Well, if you're in the market for a replacement membrane as well as a tub of the adhesive that holds it to the door I both new an unopened. I had bought them thinking I wanted to replace mine after installing the power folding mirrors, but decide that was overkill and didn't feel like putting in...